Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green rectangular circuit board with black chips, gold edge connector, no heat spreader

A-Tech

A-Tech 4GB DDR3 1600MHz CL11 1.5V 240-Pin Desktop RAM

SKU CH-RW1J-XT3HW

4GB DDR3 desktop memory running at 1600MHz with CL11 latency and 1.5V operation in a 240-pin unbuffered DIMM format

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • Tested Frequency1600
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCNo
  • Boosts system responsiveness with 1600 MHz DDR3 speed
  • Handles heavier workloads using 4 GB capacity
  • Runs at standard 1.50 V DDR3 voltage
  • Fits 240-pin desktop DIMM slots directly
  • Tested for reliable CL11 latency operation

4GB DDR3 1600MHz Desktop Module

This 4GB DDR3 DIMM runs at 1600MHz with CL11 timing and 1.5V operation. It is an unbuffered, non-ECC module built as a direct replacement for several ADATA part numbers. The 240-pin form factor fits standard desktop memory slots.

Check motherboard DDR3 support and slot count

Verify that your desktop motherboard accepts DDR3 memory and has an available 240-pin DIMM slot. Confirm the board can run at 1600MHz or will down-clock the module automatically. Ensure the system does not require registered or ECC memory, as this module is neither.

Replaces ADATA AX3U1600W4G9-DB and similar

This module replaces ADATA AX3U1600W4G9-DB, AX3U1600W4G9-DGV, AX3U1600W4G11-DD and AX3U1600GC4G9-1G sticks. The upgrade is worthwhile when your system currently has less than 4GB of DDR3 or when a failed stick needs a matched-specification replacement.

Puncte forte

  • Boosts system responsiveness with 1600 MHz DDR3 speed
  • Handles heavier workloads using 4 GB capacity
  • Runs at standard 1.50 V DDR3 voltage
  • Fits 240-pin desktop DIMM slots directly
  • Tested for reliable CL11 latency operation

Specificații

BrandA-Tech
SeriesCompatible Replacement for ADATA
ModelAX3U1600W4G9-DB, AX3U1600W4G9-DGV, AX3U1600W4G11-DD, AX3U1600GC4G9-1G
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
Tested Frequency1600
CAS LatencyCL11
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesAX3U1600W4G9-DB, AX3U1600W4G9-DGV, AX3U1600W4G11-DD, AX3U1600GC4G9-1G
Recommend UseCompatible Replacement for ADATA AX3U1600W4G9-DB, AX3U1600W4G9-DGV, AX3U1600W4G11-DD, AX3U1600GC4G9-1G

Întrebări despre acest articol

Does the 240-pin DDR3 module ship with any cables or tools, or must they be purchased separately?

The module is a bare 240-pin DIMM; no cables, screws or tools are included and none are required for installation.

Should I choose the CL11 1.5 V version or a different latency or voltage variant?

This kit is only offered as a single 4 GB stick at CL11 and 1.5 V; no other latency or voltage options exist for this part.

What does the 1600 MHz PC3-12800 rating deliver in a typical desktop?

It runs at 1600 MHz with CL11 timing at standard 1.5 V, giving a peak bandwidth of 12 800 MB/s for everyday multitasking and application loads.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.