Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green rectangular circuit board with black chips, gold edge connector, no heat spreader

A-Tech

A-Tech 4GB DDR3 1600MHz CL11 1.5V 240-Pin Desktop RAM

SKU CH-RW1J-XT3HW

4GB DDR3 desktop memory running at 1600MHz with CL11 latency and 1.5V operation in a 240-pin unbuffered DIMM format

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • Tested Frequency1600
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCNo
  • Boosts system responsiveness with 1600 MHz DDR3 speed
  • Handles heavier workloads using 4 GB capacity
  • Runs at standard 1.50 V DDR3 voltage
  • Fits 240-pin desktop DIMM slots directly
  • Tested for reliable CL11 latency operation

4GB DDR3 1600MHz Desktop Module

This 4GB DDR3 DIMM runs at 1600MHz with CL11 timing and 1.5V operation. It is an unbuffered, non-ECC module built as a direct replacement for several ADATA part numbers. The 240-pin form factor fits standard desktop memory slots.

Check motherboard DDR3 support and slot count

Verify that your desktop motherboard accepts DDR3 memory and has an available 240-pin DIMM slot. Confirm the board can run at 1600MHz or will down-clock the module automatically. Ensure the system does not require registered or ECC memory, as this module is neither.

Replaces ADATA AX3U1600W4G9-DB and similar

This module replaces ADATA AX3U1600W4G9-DB, AX3U1600W4G9-DGV, AX3U1600W4G11-DD and AX3U1600GC4G9-1G sticks. The upgrade is worthwhile when your system currently has less than 4GB of DDR3 or when a failed stick needs a matched-specification replacement.

Punti di forza

  • Boosts system responsiveness with 1600 MHz DDR3 speed
  • Handles heavier workloads using 4 GB capacity
  • Runs at standard 1.50 V DDR3 voltage
  • Fits 240-pin desktop DIMM slots directly
  • Tested for reliable CL11 latency operation

Caratteristiche tecniche

BrandA-Tech
SeriesCompatible Replacement for ADATA
ModelAX3U1600W4G9-DB, AX3U1600W4G9-DGV, AX3U1600W4G11-DD, AX3U1600GC4G9-1G
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
Tested Frequency1600
CAS LatencyCL11
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesAX3U1600W4G9-DB, AX3U1600W4G9-DGV, AX3U1600W4G11-DD, AX3U1600GC4G9-1G
Recommend UseCompatible Replacement for ADATA AX3U1600W4G9-DB, AX3U1600W4G9-DGV, AX3U1600W4G11-DD, AX3U1600GC4G9-1G

Domande su questo articolo

Does the 240-pin DDR3 module ship with any cables or tools, or must they be purchased separately?

The module is a bare 240-pin DIMM; no cables, screws or tools are included and none are required for installation.

Should I choose the CL11 1.5 V version or a different latency or voltage variant?

This kit is only offered as a single 4 GB stick at CL11 and 1.5 V; no other latency or voltage options exist for this part.

What does the 1600 MHz PC3-12800 rating deliver in a typical desktop?

It runs at 1600 MHz with CL11 timing at standard 1.5 V, giving a peak bandwidth of 12 800 MB/s for everyday multitasking and application loads.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.