Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green printed circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 8GB DDR4 2400MHz ECC RDIMM 1Rx4 CL17 1.2V Server Memory

SKU CH-27VM-WG1SH

8GB DDR4 2400MHz ECC registered server module with CL17 latency and 1.2V operation

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption with registered DDR4 technology
  • 2400 MHz speed accelerates server workloads via PC4-19200 bandwidth
  • 2 V operation reduces power draw at standard DDR4 voltage
  • 1Rx4 single-rank design fits 288-pin DIMM slots for broad compatibility
  • Validated replacement for Cisco 15-104067-01 and UCS-MR-1X081RV-A part numbers

Cisco-compatible DDR4 RDIMM

This A-Tech module delivers 8 GB of DDR4 2400 MHz registered ECC memory in a single 288-pin DIMM. It operates at the standard 1.2 V with CL17 latency and a 1Rx4 rank layout. The stick is built as a direct replacement for Cisco part numbers 15-104067-01 and UCS-MR-1X081RV-A.

Suited for Cisco UCS server upgrades

Administrators expanding memory in compatible Cisco UCS platforms will find this module matches the required registered ECC specification. It is not intended for desktop PCs, laptops or consumer motherboards that accept only unbuffered non-ECC DDR4 DIMMs.

8 GB capacity for moderate workloads

The single 8 GB rank handles typical virtualisation hosts, database buffers and application caches in supported Cisco servers. Systems needing larger memory footprints per channel or higher memory bandwidth than PC4-19200 provides should evaluate higher-capacity or faster DDR4 RDIMM options.

Puncte forte

  • ECC protection prevents data corruption with registered DDR4 technology
  • 2400 MHz speed accelerates server workloads via PC4-19200 bandwidth
  • 2 V operation reduces power draw at standard DDR4 voltage
  • 1Rx4 single-rank design fits 288-pin DIMM slots for broad compatibility
  • Validated replacement for Cisco 15-104067-01 and UCS-MR-1X081RV-A part numbers

Specificații

BrandA-Tech
SeriesCompatible Replacement for Cisco
Model15-104067-01, UCS-MR-1X081RV-A
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
Features15-104067-01, UCS-MR-1X081RV-A

Întrebări despre acest articol

Does the motherboard need to support DDR4 ECC RDIMM at 2400 MHz with 288-pin DIMM slots for this module to work?

The module requires a DDR4 ECC RDIMM 288-pin slot running at 2400 MHz and 1.2 V. Check the system manual to confirm the platform accepts registered ECC memory at that speed.

Will this stick operate alongside other DDR4 ECC RDIMM modules already installed in the server?

It can share channels with other DDR4 ECC RDIMM modules, but all sticks must run at the same voltage and the system will clock them to the lowest common speed.

How can I verify the module is recognised as 8 GB ECC RDIMM at 2400 MHz after installation?

Check the BIOS memory information or run a tool such as dmidecode or CPU-Z; it should show 8 GB, DDR4 2400, ECC RDIMM, 1Rx4, 1.2 V.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.