Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green printed circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 8GB DDR4 2400MHz ECC RDIMM 1Rx4 CL17 1.2V Server Memory

SKU CH-27VM-WG1SH

8GB DDR4 2400MHz ECC registered server module with CL17 latency and 1.2V operation

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption with registered DDR4 technology
  • 2400 MHz speed accelerates server workloads via PC4-19200 bandwidth
  • 2 V operation reduces power draw at standard DDR4 voltage
  • 1Rx4 single-rank design fits 288-pin DIMM slots for broad compatibility
  • Validated replacement for Cisco 15-104067-01 and UCS-MR-1X081RV-A part numbers

Cisco-compatible DDR4 RDIMM

This A-Tech module delivers 8 GB of DDR4 2400 MHz registered ECC memory in a single 288-pin DIMM. It operates at the standard 1.2 V with CL17 latency and a 1Rx4 rank layout. The stick is built as a direct replacement for Cisco part numbers 15-104067-01 and UCS-MR-1X081RV-A.

Suited for Cisco UCS server upgrades

Administrators expanding memory in compatible Cisco UCS platforms will find this module matches the required registered ECC specification. It is not intended for desktop PCs, laptops or consumer motherboards that accept only unbuffered non-ECC DDR4 DIMMs.

8 GB capacity for moderate workloads

The single 8 GB rank handles typical virtualisation hosts, database buffers and application caches in supported Cisco servers. Systems needing larger memory footprints per channel or higher memory bandwidth than PC4-19200 provides should evaluate higher-capacity or faster DDR4 RDIMM options.

Poudarki

  • ECC protection prevents data corruption with registered DDR4 technology
  • 2400 MHz speed accelerates server workloads via PC4-19200 bandwidth
  • 2 V operation reduces power draw at standard DDR4 voltage
  • 1Rx4 single-rank design fits 288-pin DIMM slots for broad compatibility
  • Validated replacement for Cisco 15-104067-01 and UCS-MR-1X081RV-A part numbers

Specifikacije

BrandA-Tech
SeriesCompatible Replacement for Cisco
Model15-104067-01, UCS-MR-1X081RV-A
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
Features15-104067-01, UCS-MR-1X081RV-A

Vprašanja o tem izdelku

Does the motherboard need to support DDR4 ECC RDIMM at 2400 MHz with 288-pin DIMM slots for this module to work?

The module requires a DDR4 ECC RDIMM 288-pin slot running at 2400 MHz and 1.2 V. Check the system manual to confirm the platform accepts registered ECC memory at that speed.

Will this stick operate alongside other DDR4 ECC RDIMM modules already installed in the server?

It can share channels with other DDR4 ECC RDIMM modules, but all sticks must run at the same voltage and the system will clock them to the lowest common speed.

How can I verify the module is recognised as 8 GB ECC RDIMM at 2400 MHz after installation?

Check the BIOS memory information or run a tool such as dmidecode or CPU-Z; it should show 8 GB, DDR4 2400, ECC RDIMM, 1Rx4, 1.2 V.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.