Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Square grey thermal adhesive pad 30 by 30 by .5 millimetres with protective foil on both sides

Alphacool

Alphacool Double-Sided Adhesive Pad 30x30x0.5mm 1W/mK Grey 31086

SKU CH-XMNN-B0BZ5

Double-sided thermal adhesive pad measuring 30x30x.5mm with 1W/mK conductivity secures heatsinks without brackets and withstands 16N per 25mm

  • FeaturesAlphacool s answer to the often difficult situation of being
  • Mount heatsinks anywhere without brackets or hole spacing
  • Double-sided adhesive holds up to 16N per 25mm for heavy coolers
  • Thermal conductivity of 1W/mK transfers heat efficiently
  • Pre-cut 30x30x0.5mm pad fits small components precisely
  • Protective foil on both sides keeps adhesive clean until use

Adhesive pad for heatsink mounting

This double-sided thermal adhesive pad from Alphacool lets you attach a heatsink wherever needed without brackets or matching hole patterns. It suits builders who cannot use conventional mounting hardware on graphics cards, motherboards or similar components. The pad measures 30 by 30 by 0.5 millimetres and is supplied new with protective foil on both sides.

Thermal and mechanical limits

Thermal conductivity is rated at 1W/mK so the pad conducts heat rather than insulating the joint. Adhesive strength reaches at least 16 newtons per 25 millimetres, which the manufacturer says exceeds some duct tapes and can hold heavy coolers through transport shock or permanent pressure. The rubbery material remains compliant after the foil is removed.

0.5 millimetre bond-line thickness

The fixed 0.5 millimetre thickness sets the gap between component and heatsink and cannot be changed. Buyers who need a thinner or thicker interface layer, or who require higher thermal conductivity for high-power devices, should look for a different pad specification.

Puncte forte

  • Mount heatsinks anywhere without brackets or hole spacing
  • Double-sided adhesive holds up to 16N per 25mm for heavy coolers
  • Thermal conductivity of 1W/mK transfers heat efficiently
  • Pre-cut 30x30x0.5mm pad fits small components precisely
  • Protective foil on both sides keeps adhesive clean until use

Specificații

BrandAlphacool
Model31086
Part Number31086
FeaturesAlphacool s answer to the often difficult situation of being unable to mount the heatsink conventionally. With this double-sided thermal adhesive pad from Alphacool it is possible to mount a heatsink at any desired spot without having to worry about mounts, hole spacing or other constructive details.

Întrebări despre acest articol

Should I pick the 30x30x0.5mm pad or a different thickness for my heatsink?

The pad measures 30 by 30 millimetres with a 0.5 millimetre thickness, so choose it when your mounting surface matches those dimensions and you need a thin thermal interface.

What does the 1W/mK thermal conductivity mean once the pad is installed?

It transfers heat at up to one watt per metre-kelvin, providing a conductive path between the component and heatsink while the adhesive holds them together.

How strong is the adhesive bond on this double-sided pad?

Testing shows a holding power of at least 16 newtons per 25 millimetres, giving an adhesive force greater than some duct tapes for securing heavy coolers.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.