Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Square grey thermal adhesive pad 30 by 30 by .5 millimetres with protective foil on both sides

Alphacool

Alphacool Double-Sided Adhesive Pad 30x30x0.5mm 1W/mK Grey 31086

SKU CH-XMNN-B0BZ5

Double-sided thermal adhesive pad measuring 30x30x.5mm with 1W/mK conductivity secures heatsinks without brackets and withstands 16N per 25mm

  • FeaturesAlphacool s answer to the often difficult situation of being
  • Mount heatsinks anywhere without brackets or hole spacing
  • Double-sided adhesive holds up to 16N per 25mm for heavy coolers
  • Thermal conductivity of 1W/mK transfers heat efficiently
  • Pre-cut 30x30x0.5mm pad fits small components precisely
  • Protective foil on both sides keeps adhesive clean until use

Adhesive pad for heatsink mounting

This double-sided thermal adhesive pad from Alphacool lets you attach a heatsink wherever needed without brackets or matching hole patterns. It suits builders who cannot use conventional mounting hardware on graphics cards, motherboards or similar components. The pad measures 30 by 30 by 0.5 millimetres and is supplied new with protective foil on both sides.

Thermal and mechanical limits

Thermal conductivity is rated at 1W/mK so the pad conducts heat rather than insulating the joint. Adhesive strength reaches at least 16 newtons per 25 millimetres, which the manufacturer says exceeds some duct tapes and can hold heavy coolers through transport shock or permanent pressure. The rubbery material remains compliant after the foil is removed.

0.5 millimetre bond-line thickness

The fixed 0.5 millimetre thickness sets the gap between component and heatsink and cannot be changed. Buyers who need a thinner or thicker interface layer, or who require higher thermal conductivity for high-power devices, should look for a different pad specification.

Punti di forza

  • Mount heatsinks anywhere without brackets or hole spacing
  • Double-sided adhesive holds up to 16N per 25mm for heavy coolers
  • Thermal conductivity of 1W/mK transfers heat efficiently
  • Pre-cut 30x30x0.5mm pad fits small components precisely
  • Protective foil on both sides keeps adhesive clean until use

Caratteristiche tecniche

BrandAlphacool
Model31086
Part Number31086
FeaturesAlphacool s answer to the often difficult situation of being unable to mount the heatsink conventionally. With this double-sided thermal adhesive pad from Alphacool it is possible to mount a heatsink at any desired spot without having to worry about mounts, hole spacing or other constructive details.

Domande su questo articolo

Should I pick the 30x30x0.5mm pad or a different thickness for my heatsink?

The pad measures 30 by 30 millimetres with a 0.5 millimetre thickness, so choose it when your mounting surface matches those dimensions and you need a thin thermal interface.

What does the 1W/mK thermal conductivity mean once the pad is installed?

It transfers heat at up to one watt per metre-kelvin, providing a conductive path between the component and heatsink while the adhesive holds them together.

How strong is the adhesive bond on this double-sided pad?

Testing shows a holding power of at least 16 newtons per 25 millimetres, giving an adhesive force greater than some duct tapes for securing heavy coolers.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.