Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Four clear PETG hard tubes, 12 mm outer diameter, 80 cm long

Alphacool

Alphacool Eisrohr 12/9mm PETG HardTube 80cm 4pcs Clear

SKU CH-35CT-E3136

Four clear PETG tubes with 12 mm outer and 9 mm inner diameter, 80 cm long each, for custom water-cooling loops

  • ColorClear
  • FeaturesThe Alphacool Eisrohr PETG HardTube givse the user the possi
  • Create a custom loop look with clear 12/9 mm PETG tubes
  • 3 mm wall thickness gives strength while staying easy to bend
  • PETG needs less heat than acrylic for simpler shaping
  • Four 80 cm tubes included for multiple runs
  • 50 g net weight keeps the build light

Alphacool Eisrohr 12/9mm PETG HardTube 80cm Clear

This pack contains four clear PETG hard tubes designed for custom water cooling loops. Each tube measures 80 cm in length with a 12 mm outer diameter and 9 mm inner diameter. The 3 mm wall thickness provides strength while remaining workable for bending with moderate heat. They suit builders who want rigid tubing aesthetics.

Builders creating a custom open loop

The material is PETG, which requires significantly less heat to bend than acrylic alternatives and can be shaped without great effort. Cut edges must be chamfered using a fine file, sandpaper or a dedicated deburrer to prevent O-ring damage during assembly. This product is not for buyers who need flexible tubing or push-fit connections.

12 mm outer diameter with 9 mm inner diameter

The 12/9mm sizing determines compatibility with matching compression fittings and other loop components. Verify that every block, radiator, reservoir and fitting in your build uses this exact dimension before purchasing. The clear finish suits any coolant colour.

Puncte forte

  • Create a custom loop look with clear 12/9 mm PETG tubes
  • 3 mm wall thickness gives strength while staying easy to bend
  • PETG needs less heat than acrylic for simpler shaping
  • Four 80 cm tubes included for multiple runs
  • 50 g net weight keeps the build light

Specificații

BrandAlphacool
Model4250197186322
ColorClear
FeaturesThe Alphacool Eisrohr PETG HardTube givse the user the possibility to create a very special look. With a wall thickness of 3 mm, the tubes are very strong, but can still be bent without great effort and they are easy to fit.

Întrebări despre acest articol

How can I tell the 12/9 mm tubes are seated correctly after installation?

Press each tube fully into its fitting until it stops, then tug gently — the 3 mm wall should show no gap at the O-ring and the tube must not pull free.

What comes in the pack and what extra items are needed to finish a loop?

Four clear PETG tubes, each 80 cm long with 12 mm outer and 9 mm inner diameter; you must supply 12/9 mm compression fittings, a tube cutter or fine-tooth saw, chamfer tool or deburrer, and coolant.

Which version should I choose if my fittings are 12/9 mm?

This pack matches 12/9 mm fittings exactly — outer diameter 12 mm, inner diameter 9 mm, 80 cm length, four pieces — so select it when your loop uses that size.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.