Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Four clear PETG hard tubes, 12 mm outer diameter, 80 cm long

Alphacool

Alphacool Eisrohr 12/9mm PETG HardTube 80cm 4pcs Clear

SKU CH-35CT-E3136

Four clear PETG tubes with 12 mm outer and 9 mm inner diameter, 80 cm long each, for custom water-cooling loops

  • ColorClear
  • FeaturesThe Alphacool Eisrohr PETG HardTube givse the user the possi
  • Create a custom loop look with clear 12/9 mm PETG tubes
  • 3 mm wall thickness gives strength while staying easy to bend
  • PETG needs less heat than acrylic for simpler shaping
  • Four 80 cm tubes included for multiple runs
  • 50 g net weight keeps the build light

Alphacool Eisrohr 12/9mm PETG HardTube 80cm Clear

This pack contains four clear PETG hard tubes designed for custom water cooling loops. Each tube measures 80 cm in length with a 12 mm outer diameter and 9 mm inner diameter. The 3 mm wall thickness provides strength while remaining workable for bending with moderate heat. They suit builders who want rigid tubing aesthetics.

Builders creating a custom open loop

The material is PETG, which requires significantly less heat to bend than acrylic alternatives and can be shaped without great effort. Cut edges must be chamfered using a fine file, sandpaper or a dedicated deburrer to prevent O-ring damage during assembly. This product is not for buyers who need flexible tubing or push-fit connections.

12 mm outer diameter with 9 mm inner diameter

The 12/9mm sizing determines compatibility with matching compression fittings and other loop components. Verify that every block, radiator, reservoir and fitting in your build uses this exact dimension before purchasing. The clear finish suits any coolant colour.

Pluspunten

  • Create a custom loop look with clear 12/9 mm PETG tubes
  • 3 mm wall thickness gives strength while staying easy to bend
  • PETG needs less heat than acrylic for simpler shaping
  • Four 80 cm tubes included for multiple runs
  • 50 g net weight keeps the build light

Specificaties

BrandAlphacool
Model4250197186322
ColorClear
FeaturesThe Alphacool Eisrohr PETG HardTube givse the user the possibility to create a very special look. With a wall thickness of 3 mm, the tubes are very strong, but can still be bent without great effort and they are easy to fit.

Vragen over dit artikel

How can I tell the 12/9 mm tubes are seated correctly after installation?

Press each tube fully into its fitting until it stops, then tug gently — the 3 mm wall should show no gap at the O-ring and the tube must not pull free.

What comes in the pack and what extra items are needed to finish a loop?

Four clear PETG tubes, each 80 cm long with 12 mm outer and 9 mm inner diameter; you must supply 12/9 mm compression fittings, a tube cutter or fine-tooth saw, chamfer tool or deburrer, and coolant.

Which version should I choose if my fittings are 12/9 mm?

This pack matches 12/9 mm fittings exactly — outer diameter 12 mm, inner diameter 9 mm, 80 cm length, four pieces — so select it when your loop uses that size.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.