Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Chrome compression fitting with knurled nut and G1/4 thread

Alphacool

Alphacool Eiszapfen 16/10mm G1/4 Compression Fitting Chrome 17233

SKU CH-30WC-DTF0X

G1/4 compression fitting for 16 mm OD and 10 mm ID hard tubing with chrome finish

  • TypeFittings

Color Chrome

  • High-flow design supports efficient coolant circulation
  • Chrome coating resists chipping and peeling over time
  • Angled nut corners secure O-ring against hard tubing
  • Three coloured O-rings included for custom colour themes
  • G1/4 thread fits 95% of water-cooling components

Precision Chrome Fitting for 16/10mm Tubing

This Alphacool Eiszapfen compression fitting connects 16 mm outer-diameter, 10 mm inner-diameter hard tubing to any component with a G1/4 thread. The straight chrome body suits custom-loop builders who want a secure, high-flow joint with a consistent metallic finish across the whole loop.

Sealed Connection with Coloured O-Rings

A slanted nut profile presses the supplied O-ring firmly against the tube wall for a leak-resistant seal that survives transport vibration. Three coloured O-rings are included so the builder can match or contrast the loop's accent colour, and the coating process resists chipping or peeling over time.

G1/4 Thread Fits 95% of Water-Cooling Parts

The quarter-inch thread is compatible with 95% of radiators, blocks, reservoirs and pumps on the market, so this single fitting type can be used throughout almost any custom loop without adapter hassle.

Puncte forte

  • High-flow design supports efficient coolant circulation
  • Chrome coating resists chipping and peeling over time
  • Angled nut corners secure O-ring against hard tubing
  • Three coloured O-rings included for custom colour themes
  • G1/4 thread fits 95% of water-cooling components

Specificații

TypeFittings

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How do I install the 16/10mm compression fitting on hard tubing and what step is often missed?

Slide the nut and olive onto the 16mm OD tube, push the tube fully into the fitting until it seats against the internal stop, then tighten the nut by hand plus a quarter turn; the step often missed is not pushing the tube all the way to the stop before tightening.

What maintenance or replacement will the Eiszapfen 17233 fitting need over time?

The three coloured O-rings supplied with the fitting should be inspected periodically and replaced if they show hardening, cracking or coolant residue, as they are the only wear items on the chrome-plated brass body.

What is the first limit reached when the loop runs under sustained high flow?

The G1/4 thread limits compatibility to the 95% of components that use that thread standard; beyond that the fitting’s straight 16/10mm bore imposes no additional flow restriction.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.