Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Chrome compression fitting with knurled nut and G1/4 thread

Alphacool

Alphacool Eiszapfen 16/10mm G1/4 Compression Fitting Chrome 17233

SKU CH-30WC-DTF0X

G1/4 compression fitting for 16 mm OD and 10 mm ID hard tubing with chrome finish

  • TypeFittings

Color Chrome

  • High-flow design supports efficient coolant circulation
  • Chrome coating resists chipping and peeling over time
  • Angled nut corners secure O-ring against hard tubing
  • Three coloured O-rings included for custom colour themes
  • G1/4 thread fits 95% of water-cooling components

Precision Chrome Fitting for 16/10mm Tubing

This Alphacool Eiszapfen compression fitting connects 16 mm outer-diameter, 10 mm inner-diameter hard tubing to any component with a G1/4 thread. The straight chrome body suits custom-loop builders who want a secure, high-flow joint with a consistent metallic finish across the whole loop.

Sealed Connection with Coloured O-Rings

A slanted nut profile presses the supplied O-ring firmly against the tube wall for a leak-resistant seal that survives transport vibration. Three coloured O-rings are included so the builder can match or contrast the loop's accent colour, and the coating process resists chipping or peeling over time.

G1/4 Thread Fits 95% of Water-Cooling Parts

The quarter-inch thread is compatible with 95% of radiators, blocks, reservoirs and pumps on the market, so this single fitting type can be used throughout almost any custom loop without adapter hassle.

Přednosti

  • High-flow design supports efficient coolant circulation
  • Chrome coating resists chipping and peeling over time
  • Angled nut corners secure O-ring against hard tubing
  • Three coloured O-rings included for custom colour themes
  • G1/4 thread fits 95% of water-cooling components

Specifikace

TypeFittings

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How do I install the 16/10mm compression fitting on hard tubing and what step is often missed?

Slide the nut and olive onto the 16mm OD tube, push the tube fully into the fitting until it seats against the internal stop, then tighten the nut by hand plus a quarter turn; the step often missed is not pushing the tube all the way to the stop before tightening.

What maintenance or replacement will the Eiszapfen 17233 fitting need over time?

The three coloured O-rings supplied with the fitting should be inspected periodically and replaced if they show hardening, cracking or coolant residue, as they are the only wear items on the chrome-plated brass body.

What is the first limit reached when the loop runs under sustained high flow?

The G1/4 thread limits compatibility to the 95% of components that use that thread standard; beyond that the fitting’s straight 16/10mm bore imposes no additional flow restriction.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.