Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Chrome straight compression fitting with knurled nut and G1/4 thread

Alphacool

Alphacool Eiszapfen 1/2" ID x 3/4" OD G1/4 Compression Fitting Chrome

SKU CH-8RPS-2K1RE

Connects 13 mm ID and 19 mm OD hard tubing with a G1/4 thread compatible with 95% of components, featuring a durable chrome coating that resists chipping

  • TypeFittings

Color Chrome

  • High-flow design supports efficient coolant circulation
  • Chrome coating bonded to resist chipping and peeling
  • Slanted nut corners press O-ring firmly for secure HardTube seating
  • G1/4 thread fits 95% of water-cooling components
  • Three coloured O-rings included for customisation or UV glow

Chrome Hard-Tube Fitting 13/19 mm

This G1/4 straight compression fitting joins 1/2" ID by 3/4" OD hard tubing in custom liquid-cooling loops. A slanted nut profile presses the included O-ring firmly against the tube for a secure seal that resists vibration during transport. The durable chrome coating is bonded by a special process that prevents chipping or peeling over time. Three coloured O-rings are supplied, with an optional UV-reactive variant available for lighting effects.

Suits single-loop builders wanting premium chrome

This single straight fitting only addresses one connection point; a complete loop requires multiple fittings in various angles. It accepts only 13 mm ID / 19 mm OD rigid tubing, so soft-tube or other diameter systems are not compatible. The G1/4 thread fits standard water-blocks and radiators, but proprietary thread components will not work. Buyers needing angled, rotary or bulkhead configurations must source additional parts separately.

13 mm ID 19 mm OD hard-tube compatibility

The fitting is manufactured exclusively for 1/2" inner diameter and 3/4" outer diameter rigid tubing, identified as the 13/19 mm size. Using any other tube dimensions will prevent a reliable seal and risks leaks. The G1/4 male thread connects to the vast majority of liquid-cooling components that share this standard pitch. Confirm your tubing specifications match these exact figures before purchase.

Přednosti

  • High-flow design supports efficient coolant circulation
  • Chrome coating bonded to resist chipping and peeling
  • Slanted nut corners press O-ring firmly for secure HardTube seating
  • G1/4 thread fits 95% of water-cooling components
  • Three coloured O-rings included for customisation or UV glow

Specifikace

TypeFittings

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What tubing sizes do I need to use this 1/2" ID x 3/4" OD compression fitting?

The fitting accepts tubing with a 13 mm inner diameter and 19 mm outer diameter.

Will this G1/4 fitting thread into my existing water-blocks and radiators?

Yes, the G1/4 thread is compatible with 95% of components using that standard.

How can I confirm the fitting is sealed correctly after installation?

The slanted nut corners press the O-ring firmly against the HardTube; pressurise the loop and check for leaks.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.