Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Chrome 45-degree G1/4 female-to-female angled adapter with revolvable design

Alphacool

Alphacool G1/4 Female-Female 45° Adapter Chrome 17190

SKU CH-D320-WTTG2

A 45° chrome adapter joining two G1/4 female threads for angled routing in custom liquid-cooling loops

  • TypeFittings

Color Chrome

  • High-flow inner diameter maximises coolant throughput
  • 45° angled design routes tubing around obstacles cleanly
  • Revolvable body allows post-install alignment adjustments
  • Dual G1/4 female threads accept any compatible fitting
  • Chromatised chrome finish bonds to brass for lasting colour

Chrome 45° angled adapter

The Alphacool G1/4 female-to-female fitting redirects tubing by 45 degrees to clear obstacles inside a custom water-cooling loop. Its revolvable design lets you fine-tune the angle after installation without draining the system. Two inner threads accept any standard G1/4 male fittings for flexible routing. The chrome finish is bonded to the brass body to resist peeling over time.

Replaces rigid straight couplers

Swap this adapter in when a straight fitting forces tubing into a sharp bend or clashes with a motherboard heatsink or GPU backplate. The 45° offset gains clearance without adding a second elbow that would restrict flow. Builders who need a tighter 90° turn or a rotating multi-angle joint will need a different fitting style.

High-flow bore under sustained pressure

The enlarged inner diameter maintains low restriction during continuous pump operation, so coolant velocity stays high even during long gaming or rendering sessions. The chrome-plated brass body resists corrosion from common coolant additives without degrading. The adapter adds no moving parts and does not affect pump noise or vibration.

Puncte forte

  • High-flow inner diameter maximises coolant throughput
  • 45° angled design routes tubing around obstacles cleanly
  • Revolvable body allows post-install alignment adjustments
  • Dual G1/4 female threads accept any compatible fitting
  • Chromatised chrome finish bonds to brass for lasting colour

Specificații

TypeFittings

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What thread size does the G1/4 45° adapter use on both ends?

Both ends use a G1/4 inner thread, so any G1/4 male fitting will screw directly into either side.

How is the 45° adapter installed and what step is often missed?

Screw a G1/4 male fitting into each inner thread; the rotatable joint lets you clock the 45° angle after tightening, so align the angle before final torque.

Does the chrome finish on this 17190 adapter need any special care to prevent peeling?

The chromatised surface bonds the chrome layer to the brass body, so no extra maintenance is required to keep the finish intact.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.