Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Chrome 45-degree G1/4 female-to-female angled adapter with revolvable design

Alphacool

Alphacool G1/4 Female-Female 45° Adapter Chrome 17190

SKU CH-D320-WTTG2

A 45° chrome adapter joining two G1/4 female threads for angled routing in custom liquid-cooling loops

  • TypeFittings

Color Chrome

  • High-flow inner diameter maximises coolant throughput
  • 45° angled design routes tubing around obstacles cleanly
  • Revolvable body allows post-install alignment adjustments
  • Dual G1/4 female threads accept any compatible fitting
  • Chromatised chrome finish bonds to brass for lasting colour

Chrome 45° angled adapter

The Alphacool G1/4 female-to-female fitting redirects tubing by 45 degrees to clear obstacles inside a custom water-cooling loop. Its revolvable design lets you fine-tune the angle after installation without draining the system. Two inner threads accept any standard G1/4 male fittings for flexible routing. The chrome finish is bonded to the brass body to resist peeling over time.

Replaces rigid straight couplers

Swap this adapter in when a straight fitting forces tubing into a sharp bend or clashes with a motherboard heatsink or GPU backplate. The 45° offset gains clearance without adding a second elbow that would restrict flow. Builders who need a tighter 90° turn or a rotating multi-angle joint will need a different fitting style.

High-flow bore under sustained pressure

The enlarged inner diameter maintains low restriction during continuous pump operation, so coolant velocity stays high even during long gaming or rendering sessions. The chrome-plated brass body resists corrosion from common coolant additives without degrading. The adapter adds no moving parts and does not affect pump noise or vibration.

Poudarki

  • High-flow inner diameter maximises coolant throughput
  • 45° angled design routes tubing around obstacles cleanly
  • Revolvable body allows post-install alignment adjustments
  • Dual G1/4 female threads accept any compatible fitting
  • Chromatised chrome finish bonds to brass for lasting colour

Specifikacije

TypeFittings

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

What thread size does the G1/4 45° adapter use on both ends?

Both ends use a G1/4 inner thread, so any G1/4 male fitting will screw directly into either side.

How is the 45° adapter installed and what step is often missed?

Screw a G1/4 male fitting into each inner thread; the rotatable joint lets you clock the 45° angle after tightening, so align the angle before final torque.

Does the chrome finish on this 17190 adapter need any special care to prevent peeling?

The chromatised surface bonds the chrome layer to the brass body, so no extra maintenance is required to keep the finish intact.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.