Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
White 120mm PWM case fan, square frame 25mm deep, nine translucent blades, no LED lighting

be quiet!

be quiet! BL118 Silent Wings Pro 4 120mm PWM White case fan

SKU CH-7MR5-Q8NVM MPN BL118

A 120 mm PWM case fan with a fluid-dynamic bearing, speed switch up to 3000 rpm and 80-85 CFM airflow at 36.9 dBA

  • Fan Counts1 Fan
  • TypeCase Fan
  • Fan Size120mm
  • Bearing TypeFluid Dynamic
  • RPM3000 RPM
  • Air Flow80-85 CFM

Option 140mm PWM

Versiunile tăiate există, dar nu sunt disponibile aici.

Color White

  • Optimised blades deliver peak airflow on radiators and heatsinks
  • Speed switch selects medium, high or ultra-high PWM limits up to 3000 rpm
  • Funnel-shaped frame and minimal tip clearance create extreme static pressure
  • 6-pole motor with fluid-dynamic bearing cuts vibration for smooth running
  • Separate mounting kits included for case or radiator installation

Silent Wings Pro 4 120mm PWM White fan

The be quiet! BL118 is a 120mm PWM case fan designed for builders who prioritise low noise and high static pressure. Its fluid-dynamic bearing and 6-pole motor deliver smooth operation across the speed range. The white, non-LED frame suits clean, light-themed builds.

Upgrade from standard case fans

The jump is worthwhile when your current fans cannot push enough air through a dense radiator or heatsink without becoming loud. A three-position speed switch lets you cap the maximum at medium, high or ultra-high RPM without software. Mounting hardware covers both case and radiator installations.

Handles 80 to 85 CFM at up to 3000 RPM

This airflow and pressure headroom covers most single-radiator liquid loops and high-end air coolers. The 25mm thickness fits standard fan mounts. It runs out of steam in dual-radiator stacks or heavily restricted chassis where even higher static pressure is required.

Puncte forte

  • Optimised blades deliver peak airflow on radiators and heatsinks
  • Speed switch selects medium, high or ultra-high PWM limits up to 3000 rpm
  • Funnel-shaped frame and minimal tip clearance create extreme static pressure
  • 6-pole motor with fluid-dynamic bearing cuts vibration for smooth running
  • Separate mounting kits included for case or radiator installation

Specificații

Brandbe quiet!
Fan Counts1 Fan
TypeCase Fan
Fan Size120mm
Bearing TypeFluid Dynamic
RPM3000 RPM
Air Flow80-85 CFM
Noise Level36.9 dBA at max RPM
Power Connector4-pin PWM
ColorWhite
LEDNon-LED
Dimensions120 x 120 x 25 (mm)
Greutate la expediere0.45 kg
Dimensiunile coletului203 × 140 × 38 mm

Alte versiuni ale acestui model

3 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does the 120 mm frame with 25 mm thickness fit standard case mounts and radiators?

Yes, the 120 x 120 x 25 mm dimensions match standard case fan and radiator mounting holes.

How do I use the speed switch to change the maximum PWM limit?

Move the physical switch on the fan frame to select medium, high or ultra-high speed up to 3000 RPM before powering on.

When should I consider replacing the fluid-dynamic bearing?

The bearing is rated for long life; replace the fan if noise rises above 36.9 dBA or airflow drops below 80 CFM.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.