Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
White 120mm PWM case fan, square frame 25mm deep, nine translucent blades, no LED lighting

be quiet!

be quiet! BL118 Silent Wings Pro 4 120mm PWM White case fan

SKU CH-7MR5-Q8NVM MPN BL118

A 120 mm PWM case fan with a fluid-dynamic bearing, speed switch up to 3000 rpm and 80-85 CFM airflow at 36.9 dBA

  • Fan Counts1 Fan
  • TypeCase Fan
  • Fan Size120mm
  • Bearing TypeFluid Dynamic
  • RPM3000 RPM
  • Air Flow80-85 CFM

Option 140mm PWM

Genomstrukna varianter finns, men är inte i lager här.

Color White

  • Optimised blades deliver peak airflow on radiators and heatsinks
  • Speed switch selects medium, high or ultra-high PWM limits up to 3000 rpm
  • Funnel-shaped frame and minimal tip clearance create extreme static pressure
  • 6-pole motor with fluid-dynamic bearing cuts vibration for smooth running
  • Separate mounting kits included for case or radiator installation

Silent Wings Pro 4 120mm PWM White fan

The be quiet! BL118 is a 120mm PWM case fan designed for builders who prioritise low noise and high static pressure. Its fluid-dynamic bearing and 6-pole motor deliver smooth operation across the speed range. The white, non-LED frame suits clean, light-themed builds.

Upgrade from standard case fans

The jump is worthwhile when your current fans cannot push enough air through a dense radiator or heatsink without becoming loud. A three-position speed switch lets you cap the maximum at medium, high or ultra-high RPM without software. Mounting hardware covers both case and radiator installations.

Handles 80 to 85 CFM at up to 3000 RPM

This airflow and pressure headroom covers most single-radiator liquid loops and high-end air coolers. The 25mm thickness fits standard fan mounts. It runs out of steam in dual-radiator stacks or heavily restricted chassis where even higher static pressure is required.

I korthet

  • Optimised blades deliver peak airflow on radiators and heatsinks
  • Speed switch selects medium, high or ultra-high PWM limits up to 3000 rpm
  • Funnel-shaped frame and minimal tip clearance create extreme static pressure
  • 6-pole motor with fluid-dynamic bearing cuts vibration for smooth running
  • Separate mounting kits included for case or radiator installation

Specifikationer

Brandbe quiet!
Fan Counts1 Fan
TypeCase Fan
Fan Size120mm
Bearing TypeFluid Dynamic
RPM3000 RPM
Air Flow80-85 CFM
Noise Level36.9 dBA at max RPM
Power Connector4-pin PWM
ColorWhite
LEDNon-LED
Dimensions120 x 120 x 25 (mm)
Fraktvikt0.45 kg
Paketstorlek203 × 140 × 38 mm

Andra versioner av den här modellen

3 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Does the 120 mm frame with 25 mm thickness fit standard case mounts and radiators?

Yes, the 120 x 120 x 25 mm dimensions match standard case fan and radiator mounting holes.

How do I use the speed switch to change the maximum PWM limit?

Move the physical switch on the fan frame to select medium, high or ultra-high speed up to 3000 RPM before powering on.

When should I consider replacing the fluid-dynamic bearing?

The bearing is rated for long life; replace the fan if noise rises above 36.9 dBA or airflow drops below 80 CFM.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.