Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Grey rectangular thermal pad 85 by 45 by 1.5 mm

Bean

Bean Thermal Pad 12.8 W/mK 85x45x1.5mm

SKU CH-CTVZ-4WRWT

High-conductivity 12.8 W/mK silicone pad fills gaps between chips and heatsinks, stays stable from –40 °C to 200 °C, and cuts to size for CPU, GPU or LED cooling

  • High 12.8 W/mK conductivity moves heat fast
  • Non-conductive silicone prevents electrical shorts
  • Withstands -40 °C to 200 °C without melting
  • Easy to cut 85 × 45 mm sheet to size
  • Replaces messy paste on CPU GPU LED heatsinks

Product Identity

The Bean thermal pad measures 85 x 45 x 1.5 mm and delivers 12.8 W/mK thermal conductivity. It is a non-conductive silicone pad designed to transfer heat between components and heatsinks in laptops, GPUs, CPUs and LED coolers. The material remains stable from -40 °C to 200 °C without melting or degrading. It suits technicians and builders who need a clean, reusable alternative to thermal paste.

Capacity and Headroom

The 12.8 W/mK rating handles typical CPU and GPU heat loads while filling uneven gaps up to 1.5 mm thick. The pad can be cut to smaller shapes for VRAM, VRM or small IC packages. It will not bridge larger gaps or replace a mounting solution that requires more compression than the material provides. Builders needing higher conductivity or thicker pads must look elsewhere.

Thermals, Noise and Power

The pad adds no active cooling, so it produces zero noise and draws no power. Its insulation and fire-retardant properties prevent electrical shorts while maintaining thermal transfer at sustained high temperatures. Thermal resistance drops once the pad conforms to both surfaces under normal mounting pressure. Long-term stability is supported by anti-corrosion and anti-static characteristics.

Puncte forte

  • High 12.8 W/mK conductivity moves heat fast
  • Non-conductive silicone prevents electrical shorts
  • Withstands -40 °C to 200 °C without melting
  • Easy to cut 85 × 45 mm sheet to size
  • Replaces messy paste on CPU GPU LED heatsinks

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

Will the 12.8 W/mK pad work with the existing heatsink on my older GPU?

Yes, the pad is non-conductive and compressible, so it safely fills gaps between the GPU die and the original heatsink without damaging metal surfaces.

How can I verify the 1.5mm pad is performing after installation?

Monitor component temperatures under load; a proper fit with the 12.8 W/mK material should reduce the temperature difference between the chip and heatsink.

Does the 85x45mm sheet include any tools or adhesive, or must I buy them separately?

The package contains only the silicone pad; you can cut it to size with ordinary scissors, and no extra adhesive is required because the material is naturally tacky.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.