BIWIN STORAGE TECHNOLOGY LIMITED
BIWIN STORAGE TECHNOLOGY LIMITED 64GB 80mm MLC SATA internal SSD
- Internal Solid Stat…
- 64GB
29,99 USD
0.00037864BTC
În stoc
BIWIN STORAGE TECHNOLOGY LIMITED
BIWIN STORAGE TECHNOLOGY LIMITED 120GB M.2 2280 SATA internal SSD
A 120GB M.2 2280 SATA SSD using MLC flash for 561MB/s read and 296MB/s write speeds with a 2,000,000-hour MTBF
- Device TypeInternal Solid State Drive (SSD)
- Form FactorM.2 2280
- Capacity120GB
- Memory ComponentsMLC
- InterfaceSATA III
- Max Sequential Read561MB/s
- SATA III interface enables 561 MB/s read speeds for fast boot and load times
- MLC NAND flash delivers 296 MB/s write performance with high endurance
- 2,000,000 hours MTBF provides long-term reliability for daily workloads
- Only 0.25 W idle power extends laptop battery life
- 50 G shock resistance protects data against drops and vibration
Form factor and capacity
This internal SSD uses the M.2 2280 form factor and provides 120GB of storage. It is built with MLC flash memory for higher endurance than typical entry-level drives. The SATA III interface makes it a direct drop-in upgrade for laptops, desktops or compact systems that have an M.2 SATA slot.
Interface and flash type
The drive connects through a SATA III 6Gb/s link and uses synchronous MLC NAND rather than TLC or QLC. That combination determines whether the part will work in a given M.2 slot and whether it delivers the write endurance needed for heavy workloads.
Sustained write behaviour
Under continuous load the sequential write speed is rated at 296MB/s while active power draw reaches 2.94W. The controller employs 66-bit BCH ECC per 1KB and the drive is rated for 2,000,000 hours MTBF across an operating range of 0°C to 70°C.
Puncte forte
- SATA III interface enables 561 MB/s read speeds for fast boot and load times
- MLC NAND flash delivers 296 MB/s write performance with high endurance
- 2,000,000 hours MTBF provides long-term reliability for daily workloads
- Only 0.25 W idle power extends laptop battery life
- 50 G shock resistance protects data against drops and vibration
Specificații
| Brand | BIWIN |
|---|---|
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2280 |
| Capacity | 120GB |
| Memory Components | MLC |
| Interface | SATA III |
| Max Sequential Read | 561MB/s |
| Max Sequential Write | 296MB/s |
| MTBF | 2,000,000 hours |
| Power Consumption (Idle) | 0.25W |
| Power Consumption (Active) | 2.94W |
| Operating Temperature | 0°C to 70°C |
| Storage Temperature | -40°C to 85°C |
| Operating Humidity | 5% to 95% |
| Max Shock Resistance | 50G,11ms, half-sine wave |
| Max Vibration Resistance | 3.1G(2-500Hz) |
| Height | 80mm |
| Width | 22mm |
| Depth | 3.2mm |
| Weight | =6.7g |
Alte versiuni ale acestui model
2 în plus din aceeași gamă
Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.
BIWIN STORAGE TECHNOLOGY LIMITED
BIWIN STORAGE TECHNOLOGY LIMITED 256GB MLC SATA III M.2 2280 internal SSD
- Internal Solid Stat…
- M.2 2280
74,99 USD
0.0009468BTC
În stocTot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
