Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Green rectangular M.2 2280 SATA SSD with gold edge connector and black label, 80mm long

BIWIN STORAGE TECHNOLOGY LIMITED

BIWIN STORAGE TECHNOLOGY LIMITED 120GB M.2 2280 SATA internal SSD

SKU CH-1TR9-E10BS

A 120GB M.2 2280 SATA SSD using MLC flash for 561MB/s read and 296MB/s write speeds with a 2,000,000-hour MTBF

  • Device TypeInternal Solid State Drive (SSD)
  • Form FactorM.2 2280
  • Capacity120GB
  • Memory ComponentsMLC
  • InterfaceSATA III
  • Max Sequential Read561MB/s

Options 120GB

  • SATA III interface enables 561 MB/s read speeds for fast boot and load times
  • MLC NAND flash delivers 296 MB/s write performance with high endurance
  • 2,000,000 hours MTBF provides long-term reliability for daily workloads
  • Only 0.25 W idle power extends laptop battery life
  • 50 G shock resistance protects data against drops and vibration

Form factor and capacity

This internal SSD uses the M.2 2280 form factor and provides 120GB of storage. It is built with MLC flash memory for higher endurance than typical entry-level drives. The SATA III interface makes it a direct drop-in upgrade for laptops, desktops or compact systems that have an M.2 SATA slot.

Interface and flash type

The drive connects through a SATA III 6Gb/s link and uses synchronous MLC NAND rather than TLC or QLC. That combination determines whether the part will work in a given M.2 slot and whether it delivers the write endurance needed for heavy workloads.

Sustained write behaviour

Under continuous load the sequential write speed is rated at 296MB/s while active power draw reaches 2.94W. The controller employs 66-bit BCH ECC per 1KB and the drive is rated for 2,000,000 hours MTBF across an operating range of 0°C to 70°C.

Puntos fuertes

  • SATA III interface enables 561 MB/s read speeds for fast boot and load times
  • MLC NAND flash delivers 296 MB/s write performance with high endurance
  • 2,000,000 hours MTBF provides long-term reliability for daily workloads
  • Only 0.25 W idle power extends laptop battery life
  • 50 G shock resistance protects data against drops and vibration

Especificaciones

BrandBIWIN
Device TypeInternal Solid State Drive (SSD)
Form FactorM.2 2280
Capacity120GB
Memory ComponentsMLC
InterfaceSATA III
Max Sequential Read561MB/s
Max Sequential Write296MB/s
MTBF2,000,000 hours
Power Consumption (Idle)0.25W
Power Consumption (Active)2.94W
Operating Temperature0°C to 70°C
Storage Temperature-40°C to 85°C
Operating Humidity5% to 95%
Max Shock Resistance50G,11ms, half-sine wave
Max Vibration Resistance3.1G(2-500Hz)
Height80mm
Width22mm
Depth3.2mm
Weight=6.7g

Otras versiones de este modelo

2 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.