Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green 288-pin DDR4 RDIMM with black chips and gold contacts

Brute Networks

Brute Networks 832961-001 HP Compatible 8GB DDR4-2133 ECC Registered RDIMM 1Rx4 CL15 1.2V

SKU CH-MPHH-VGCQQ

8GB DDR4-2133 ECC registered RDIMM with 288 pins, CL15 latency and 1.2V operation for HP-compatible servers

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • 8GB capacity expands server workloads and virtualization headroom
  • DDR4-2133 CL15 registered ECC protects data integrity under load
  • 2V operation reduces power draw per module
  • 288-pin RDIMM form factor fits standard server slots
  • 100% HP 832961-001 compatible maintains original service contracts

HP Compatible 8GB DDR4-2133 RDIMM

This 8GB registered DDR4 module operates at 2133 MHz with CL15 latency and 1.20V voltage. It uses a 288-pin 1Rx4 layout with ECC for data integrity in server environments. The part matches HP specification 832961-001 for drop-in upgrades.

Sustained load behaviour

Registered buffering and ECC correction keep data flow stable during continuous workloads such as virtualisation or database serving. Major-brand DRAM chips (Samsung, SK Hynix or Micron) maintain timing consistency across extended operating periods without throttling.

DDR4 interface limits

The PC4-17000 standard caps transfer rate at 2133 MT/s, so bandwidth cannot exceed this ceiling regardless of CPU capability. Single-rank density restricts maximum capacity per channel compared to dual-rank or LRDIMM alternatives. Buyers needing higher frequencies or greater density per slot must select a different DDR4 specification.

Puncte forte

  • 8GB capacity expands server workloads and virtualization headroom
  • DDR4-2133 CL15 registered ECC protects data integrity under load
  • 2V operation reduces power draw per module
  • 288-pin RDIMM form factor fits standard server slots
  • 100% HP 832961-001 compatible maintains original service contracts

Specificații

BrandHP
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset

Întrebări despre acest articol

How much power does this 1.20 V DDR4-2133 RDIMM draw when the server runs continuously?

The module operates at 1.20 V, the standard DDR4 voltage, so power draw stays within the normal range for registered ECC DIMMs of this density.

What motherboard slot and firmware support are required to install this 288-pin registered ECC module?

A 288-pin DDR4 RDIMM slot and a server BIOS that recognises registered ECC memory are needed; the stick is built to meet the HP 832961-001 specification.

Can this CL15 1Rx4 module share a channel with existing dual-rank DDR4 RDIMMs in the same HP server?

Yes, the 1Rx4 organisation follows the PC4-17000 standard, allowing it to populate open slots alongside other registered DDR4 DIMMs of matching speed.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.