Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 288-pin DDR4 RDIMM with black chips and gold contacts

Brute Networks

Brute Networks 832961-001 HP Compatible 8GB DDR4-2133 ECC Registered RDIMM 1Rx4 CL15 1.2V

SKU CH-MPHH-VGCQQ

8GB DDR4-2133 ECC registered RDIMM with 288 pins, CL15 latency and 1.2V operation for HP-compatible servers

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • 8GB capacity expands server workloads and virtualization headroom
  • DDR4-2133 CL15 registered ECC protects data integrity under load
  • 2V operation reduces power draw per module
  • 288-pin RDIMM form factor fits standard server slots
  • 100% HP 832961-001 compatible maintains original service contracts

HP Compatible 8GB DDR4-2133 RDIMM

This 8GB registered DDR4 module operates at 2133 MHz with CL15 latency and 1.20V voltage. It uses a 288-pin 1Rx4 layout with ECC for data integrity in server environments. The part matches HP specification 832961-001 for drop-in upgrades.

Sustained load behaviour

Registered buffering and ECC correction keep data flow stable during continuous workloads such as virtualisation or database serving. Major-brand DRAM chips (Samsung, SK Hynix or Micron) maintain timing consistency across extended operating periods without throttling.

DDR4 interface limits

The PC4-17000 standard caps transfer rate at 2133 MT/s, so bandwidth cannot exceed this ceiling regardless of CPU capability. Single-rank density restricts maximum capacity per channel compared to dual-rank or LRDIMM alternatives. Buyers needing higher frequencies or greater density per slot must select a different DDR4 specification.

Pluspunten

  • 8GB capacity expands server workloads and virtualization headroom
  • DDR4-2133 CL15 registered ECC protects data integrity under load
  • 2V operation reduces power draw per module
  • 288-pin RDIMM form factor fits standard server slots
  • 100% HP 832961-001 compatible maintains original service contracts

Specificaties

BrandHP
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset

Vragen over dit artikel

How much power does this 1.20 V DDR4-2133 RDIMM draw when the server runs continuously?

The module operates at 1.20 V, the standard DDR4 voltage, so power draw stays within the normal range for registered ECC DIMMs of this density.

What motherboard slot and firmware support are required to install this 288-pin registered ECC module?

A 288-pin DDR4 RDIMM slot and a server BIOS that recognises registered ECC memory are needed; the stick is built to meet the HP 832961-001 specification.

Can this CL15 1Rx4 module share a channel with existing dual-rank DDR4 RDIMMs in the same HP server?

Yes, the 1Rx4 organisation follows the PC4-17000 standard, allowing it to populate open slots alongside other registered DDR4 DIMMs of matching speed.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.