Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with black memory chips and gold edge connectors

Brute Networks

Brute Networks 8GB DDR4-2666 ECC UDIMM 1Rx8 CL15 1.2V 840755-091

SKU CH-ZTFW-235CQ

8GB DDR4-2666 ECC UDIMM with CL15 latency and 1.2V operation for HP servers

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnregistered
  • 8GB DDR4-2666 capacity expands server memory
  • CL15 latency at 1.2V reduces access delay
  • ECC UDIMM detects and corrects data errors
  • 1Rx8 major-brand chips match OEM specifications
  • HP 840755-091 compatible for validated integration

8GB DDR4-2666 ECC UDIMM

This Brute Networks module is an 8 GB DDR4-2666 ECC UDIMM built with major-brand chips. It runs at PC4-21300 speed with CL15 latency and 1.20 V operation. The stick is 100 percent HP compatible and matches part number 840755-091 for direct replacement in supported servers.

Suitable for HP server upgrades.

This memory suits administrators expanding HP servers that require ECC UDIMMs at DDR4-2666. Builders needing non-ECC modules, registered DIMMs, higher capacities or different voltages should look at other parts.

Deciding spec: ECC UDIMM at DDR4-2666

The single specification that decides fitment is the ECC UDIMM DDR4-2666 format. Only systems accepting unregistered ECC modules at this exact speed and voltage will support the part.

Puncte forte

  • 8GB DDR4-2666 capacity expands server memory
  • CL15 latency at 1.2V reduces access delay
  • ECC UDIMM detects and corrects data errors
  • 1Rx8 major-brand chips match OEM specifications
  • HP 840755-091 compatible for validated integration

Specificații

BrandHP
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnregistered
ChipsetMajor Brand Chipset

Întrebări despre acest articol

Will this DDR4-2666 ECC UDIMM fit a standard 288-pin DIMM slot on an HP server motherboard?

Yes, the module follows the standard 288-pin DDR4 UDIMM form factor used by HP servers supporting PC4-21300 memory.

What is the correct way to seat this 1Rx8 module so the ECC function initialises properly?

Align the notch with the slot key, press firmly until both retention clips click, then verify 2666 MHz speed and ECC status in BIOS.

When should I consider replacing this 8GB stick if ECC corrected-error counts start rising?

Monitor the IPMI or iLO logs; sustained correctable errors on this module typically indicate it is time to swap it out.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.