Axiom
Axiom AXG72095858/1 16 GB DDR4 SoDIMM 260-pin 2133 MHz CL15 ECC server RAM
324,99 $
0.00414989BTC
Auf Lager
Brute Networks
Brute Networks 8GB DDR4-2666 ECC UDIMM 1Rx8 CL15 1.2V 840755-091
8GB DDR4-2666 ECC UDIMM with CL15 latency and 1.2V operation for HP servers
- Capacity8GB
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- Buffered/RegisteredUnregistered
- 8GB DDR4-2666 capacity expands server memory
- CL15 latency at 1.2V reduces access delay
- ECC UDIMM detects and corrects data errors
- 1Rx8 major-brand chips match OEM specifications
- HP 840755-091 compatible for validated integration
8GB DDR4-2666 ECC UDIMM
This Brute Networks module is an 8 GB DDR4-2666 ECC UDIMM built with major-brand chips. It runs at PC4-21300 speed with CL15 latency and 1.20 V operation. The stick is 100 percent HP compatible and matches part number 840755-091 for direct replacement in supported servers.
Suitable for HP server upgrades.
This memory suits administrators expanding HP servers that require ECC UDIMMs at DDR4-2666. Builders needing non-ECC modules, registered DIMMs, higher capacities or different voltages should look at other parts.
Deciding spec: ECC UDIMM at DDR4-2666
The single specification that decides fitment is the ECC UDIMM DDR4-2666 format. Only systems accepting unregistered ECC modules at this exact speed and voltage will support the part.
Besonderheiten
- 8GB DDR4-2666 capacity expands server memory
- CL15 latency at 1.2V reduces access delay
- ECC UDIMM detects and corrects data errors
- 1Rx8 major-brand chips match OEM specifications
- HP 840755-091 compatible for validated integration
Technische Daten
| Brand | HP |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Chipset | Major Brand Chipset |
Fragen zu diesem Artikel
Will this DDR4-2666 ECC UDIMM fit a standard 288-pin DIMM slot on an HP server motherboard?
Yes, the module follows the standard 288-pin DDR4 UDIMM form factor used by HP servers supporting PC4-21300 memory.
What is the correct way to seat this 1Rx8 module so the ECC function initialises properly?
Align the notch with the slot key, press firmly until both retention clips click, then verify 2666 MHz speed and ECC status in BIOS.
When should I consider replacing this 8GB stick if ECC corrected-error counts start rising?
Monitor the IPMI or iLO logs; sustained correctable errors on this module typically indicate it is time to swap it out.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
Supermicro
Supermicro 2 kW Redundant Server Power Supply 80 Plus Titanium 12 V 166.70 A
- 120 V AC 230 V AC
- 96%
458,99 $
0.00586097BTC
Auf Lager