Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green 240-pin DDR3 DIMM sticks, no heat spreader

Computer Memory Solutions

Computer Memory Solutions 16GB (2x8GB) DDR3 1333MHz CL9 1.5V 240-Pin DIMM Kit for HP 6200 Pro SFF/MT - A66

SKU CH-XTJ2-89HZV

16 GB DDR3 kit with two 8 GB modules at 1333 MHz CL9 for HP 6200 Pro SFF/MT

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 16 GB total capacity for HP 6200 Pro SFF/MT
  • 2 x 8 GB DDR3 modules run at 1333 MHz
  • CL9 timing and 1.5 V voltage for stable operation
  • 240-pin unbuffered non-ECC DIMM form factor
  • Guaranteed compatibility with HP 6200 Pro SFF/MT systems

HP 6200 Pro Memory Kit

This 16 GB kit contains two 8 GB DDR3 DIMMs built for the HP 6200 Pro SFF and MT desktops. It is a direct upgrade path for owners of that platform who need the maximum supported memory. The modules are unbuffered, non-ECC and run at the standard 1.5 V.

DDR3 1333 CL9 Specification

The decisive spec is the DDR3 1333 (PC3 10600) speed with CL9 9-9-9 timing on a 240-pin interface. That exact combination matches the memory controller requirements of the 6200 Pro so the system will boot at rated speed without manual adjustment.

Suits Maxed-Out 6200 Builds

This kit suits anyone taking a 6200 Pro to its 16 GB limit using all four slots or populating two slots with 8 GB modules. It is not for systems that require ECC or registered memory, nor for boards limited to 4 GB DIMMs or a different DDR generation.

Puncte forte

  • 16 GB total capacity for HP 6200 Pro SFF/MT
  • 2 x 8 GB DDR3 modules run at 1333 MHz
  • CL9 timing and 1.5 V voltage for stable operation
  • 240-pin unbuffered non-ECC DIMM form factor
  • Guaranteed compatibility with HP 6200 Pro SFF/MT systems

Specificații

BrandComputer Memory Solutions
ModelCM10246410600DIMM
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq Business Desktop 6200 Pro (Sff/Mt)
Package Content2 Memory RAM Sticks

Întrebări despre acest articol

Will the 1333MHz rating run at full speed in an HP 6200 Pro SFF?

The kit is rated at 1333MHz (PC3-10600) and is built specifically for the HP 6200 Pro SFF/MT, so it will operate at that speed when installed in those systems.

Does the 240-pin DDR3 interface limit the maximum bandwidth?

The 240-pin DDR3 DIMM interface supports the PC3-10600 standard, which caps theoretical bandwidth at the 1333MHz data rate this kit provides.

Will the two 8GB modules fit the four slots in the 6200 Pro SFF?

The 240-pin DIMMs are the correct form factor for the 6200 Pro SFF/MT; the kit occupies two of the four available slots and reaches the 16GB maximum supported memory.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.