Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green 240-pin DDR3 DIMM sticks, no heat spreader

Computer Memory Solutions

Computer Memory Solutions 16GB (2x8GB) DDR3 1333MHz CL9 1.5V 240-Pin DIMM Kit for HP 6200 Pro SFF/MT - A66

SKU CH-XTJ2-89HZV

16 GB DDR3 kit with two 8 GB modules at 1333 MHz CL9 for HP 6200 Pro SFF/MT

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 16 GB total capacity for HP 6200 Pro SFF/MT
  • 2 x 8 GB DDR3 modules run at 1333 MHz
  • CL9 timing and 1.5 V voltage for stable operation
  • 240-pin unbuffered non-ECC DIMM form factor
  • Guaranteed compatibility with HP 6200 Pro SFF/MT systems

HP 6200 Pro Memory Kit

This 16 GB kit contains two 8 GB DDR3 DIMMs built for the HP 6200 Pro SFF and MT desktops. It is a direct upgrade path for owners of that platform who need the maximum supported memory. The modules are unbuffered, non-ECC and run at the standard 1.5 V.

DDR3 1333 CL9 Specification

The decisive spec is the DDR3 1333 (PC3 10600) speed with CL9 9-9-9 timing on a 240-pin interface. That exact combination matches the memory controller requirements of the 6200 Pro so the system will boot at rated speed without manual adjustment.

Suits Maxed-Out 6200 Builds

This kit suits anyone taking a 6200 Pro to its 16 GB limit using all four slots or populating two slots with 8 GB modules. It is not for systems that require ECC or registered memory, nor for boards limited to 4 GB DIMMs or a different DDR generation.

Přednosti

  • 16 GB total capacity for HP 6200 Pro SFF/MT
  • 2 x 8 GB DDR3 modules run at 1333 MHz
  • CL9 timing and 1.5 V voltage for stable operation
  • 240-pin unbuffered non-ECC DIMM form factor
  • Guaranteed compatibility with HP 6200 Pro SFF/MT systems

Specifikace

BrandComputer Memory Solutions
ModelCM10246410600DIMM
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq Business Desktop 6200 Pro (Sff/Mt)
Package Content2 Memory RAM Sticks

Otázky k tomuto produktu

Will the 1333MHz rating run at full speed in an HP 6200 Pro SFF?

The kit is rated at 1333MHz (PC3-10600) and is built specifically for the HP 6200 Pro SFF/MT, so it will operate at that speed when installed in those systems.

Does the 240-pin DDR3 interface limit the maximum bandwidth?

The 240-pin DDR3 DIMM interface supports the PC3-10600 standard, which caps theoretical bandwidth at the 1333MHz data rate this kit provides.

Will the two 8GB modules fit the four slots in the 6200 Pro SFF?

The 240-pin DIMMs are the correct form factor for the 6200 Pro SFF/MT; the kit occupies two of the four available slots and reaches the 16GB maximum supported memory.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.