Computer Memory Solutions
Computer Memory Solutions CM2566410600DIMM 4GB (2x2GB) DDR3 1333MHz
A 4 GB DDR3-1333 dual-channel kit validated for HP Elite 8100 and 8000 SFF systems
- Capacity4GB (2 x 2GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 4GB dual-channel kit doubles system memory
- 1333 MHz DDR3 speed matches HP Elite 8100 SFF spec
- CL9 1.5V timing keeps voltage low
- 240-pin unbuffered DIMM fits Elite 8000 SFF slots
- Lifetime warranty from CMS backs long-term reliability
Targeted DDR3 Upgrade
This kit supplies 4 GB total as two 2 GB unbuffered non-ECC DIMMs rated for DDR3 1333 (PC3 10600). It is built for HP/Compaq Elite 8100 SFF and Elite 8000 SFF Convt systems that require 240-pin DDR3 memory running at 1.5 V with CL9 timing. Buyers needing ECC, registered modules or capacities beyond 4 GB per kit will not be served by this product.
DDR3 1333 Bus Ceiling
The memory operates at the 1333 MT/s ceiling of the DDR3 10600 standard, so bandwidth is capped at that data rate regardless of the processor or chipset installed. A 32-bit operating system can address only 4 GB total, while a 64-bit OS can use up to 16 GB across the platform's four slots. Systems limited to lower DDR3 speeds will down-clock these modules automatically.
Plain Green PCB Modules
Each stick is a standard-height 240-pin DIMM without a heat spreader, allowing it to fit the tight clearances of small-form-factor Elite chassis. The 2Rx8 organisation uses major-brand chips on an unbuffered PCB, and the kit includes two matched sticks for dual-channel population. No additional brackets, cables or cooling hardware are included or required.
Puncte forte
- 4GB dual-channel kit doubles system memory
- 1333 MHz DDR3 speed matches HP Elite 8100 SFF spec
- CL9 1.5V timing keeps voltage low
- 240-pin unbuffered DIMM fits Elite 8000 SFF slots
- Lifetime warranty from CMS backs long-term reliability
Specificații
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM2566410600DIMM |
| Capacity | 4GB (2 x 2GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Hp/Compaq Elite 8100 Sff, Elite 8000 Sff Convt |
| Package Content | 2 Memory RAM Sticks |
Întrebări despre acest articol
Should I buy the 2 x 2 GB kit or a single 4 GB module?
The kit provides two 2 GB modules for dual-channel operation on the HP/Compaq Elite 8100 SFF or Elite 8000 SFF Convt, giving 4 GB total capacity.
What does the 1333 MHz speed mean for my Elite 8100 SFF?
The modules run at DDR3 1333 (PC3 10600) with CL9 9-9-9 timings at 1.5 V, matching the memory controller specification for the listed HP/Compaq systems.
Will these 240-pin DDR3 DIMMs work in my Elite 8000 SFF Convt?
Yes, they are 240-pin DDR3 SDRAM DIMMs validated for the HP/Compaq Elite 8000 SFF Convt and Elite 8100 SFF platforms.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.



