BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00265886BTC
În stoc
Corsair
Corsair Vengeance RGB Pro CMW16GX4M2Z3200C16 16GB (2x8GB) DDR4 3200 CL16 desktop RAM
16 GB dual-channel DDR4 kit running at 3200 MHz CL16 with 10 RGB LEDs per module and iCUE sync
- Capacity16GB (2 x 8GB)
- Type288-Pin PC RAM
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL16
- Timing16-18-18-36
- Voltage1.35V
- Dynamic multi-zone RGB with 10 ultra-bright LEDs per module
- iCUE software synchronizes lighting across Corsair RGB components
- Custom performance PCB delivers high signal quality for stability
- Tightly screened ICs provide extended overclocking potential
- XMP 2.0 enables optimal performance with a single BIOS setting
Vengeance RGB Pro 16GB DDR4 3200 CL16
This kit delivers 16 GB of DDR4 memory across two 8 GB modules rated at 3200 MT/s with CL16 timing. Anodized aluminum heat spreaders cover custom performance PCBs built with tightly screened ICs for signal integrity. Ten ultra-bright RGB LEDs per module provide dynamic multi-zone lighting controlled through Corsair iCUE software. The kit runs at 1.35 V and supports Intel XMP 2.0 for one-click configuration.
AMD Ryzen and Intel platform builds needing RGB
Builders using AMD 300, 400 or X570 series chipsets or Intel 300 and 400 series platforms can enable the rated speed through XMP 2.0. Systems requiring ECC, registered DIMMs or speeds beyond 3200 MT/s should consider other memory lines. The 288-pin form factor fits standard desktop slots, while iCUE synchronization works with compatible Corsair coolers, keyboards and fans. Users without RGB software needs may prefer non-lit alternatives.
Sustained load stability with screened ICs
Custom performance PCBs and carefully screened ICs maintain tight 16-18-18-36 timings during extended workloads rather than only in brief benchmarks. Anodized aluminum spreaders dissipate heat from continuous data throughput at 1.35 V. XMP 2.0 applies the validated voltage and frequency profile automatically, avoiding manual tuning drift. iCUE monitoring lets users observe module temperatures while the system runs demanding tasks.
Puncte forte
- Dynamic multi-zone RGB with 10 ultra-bright LEDs per module
- iCUE software synchronizes lighting across Corsair RGB components
- Custom performance PCB delivers high signal quality for stability
- Tightly screened ICs provide extended overclocking potential
- XMP 2.0 enables optimal performance with a single BIOS setting
Specificații
| Brand | CORSAIR |
|---|---|
| Series | Vengeance RGB Pro |
| Model | CMW16GX4M2Z3200C16 |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL16 |
| Timing | 16-18-18-36 |
| Voltage | 1.35V |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Black |
| Heat Spreader | Anodized Aluminum |
| Features | Dynamic Multi-Zone RGB Lighting 10 Ultra-bright RGB LEDs per module. Next Generation Software Take control in CORSAIR iCUE software and synchronize lighting with other CORSAIR RGB products, including CPU coolers, keyboards and fans. Custom Performance PCB Provides the highest signal quality for the greatest level of performance and stability. Tightly Screened Memory Carefully screened ICs for extended overclocking potential. Maximum Bandwidth and Tight Response Times Optimized for peak performance on the latest Intel and AMD DDR4 motherboards. No Wires Required Requires no extra wire |
| Recommend Use | AMD 300 Series / AMD 400 Series / AMD X570 / Intel 300 Series / Intel 400 Series |
| LED Color | RGB |
| Greutate la expediere | 0.15 kg |
| Dimensiunile coletului | 165 × 130 × 13 mm |
Întrebări despre acest articol
Does this kit require a motherboard with a DDR4 288-pin slot and XMP 2.0 support to run at 3200?
Yes, each module uses the 288-pin DDR4 form factor and the rated 3200 speed is activated through an Intel XMP 2.0 profile in the BIOS.
Will the 1.35 V CL16 timing of these modules match older DDR4 sticks I might keep?
The kit runs at 1.35 V with 16-18-18-36 timings; mixing with modules that use different voltages or timings may force the system to run at the lowest common settings.
How do I confirm the RGB lighting and 3200 speed are active after installation?
Enable the XMP 2.0 profile in BIOS to verify 3200 operation, then open CORSAIR iCUE software to see the 10 RGB LEDs per module respond to lighting controls.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
