我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two black DDR4 modules with anodized aluminium heat spreaders and ten RGB LEDs each

Corsair

Corsair Vengeance RGB Pro CMW16GX4M2Z3200C16 16GB (2x8GB) DDR4 3200 CL16 desktop RAM

SKU CH-7Y8K-HZ38J MPN CMW16GX4M2Z3200C16

16 GB dual-channel DDR4 kit running at 3200 MHz CL16 with 10 RGB LEDs per module and iCUE sync

  • Capacity16GB (2 x 8GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL16
  • Timing16-18-18-36
  • Voltage1.35V
  • Dynamic multi-zone RGB with 10 ultra-bright LEDs per module
  • iCUE software synchronizes lighting across Corsair RGB components
  • Custom performance PCB delivers high signal quality for stability
  • Tightly screened ICs provide extended overclocking potential
  • XMP 2.0 enables optimal performance with a single BIOS setting

Vengeance RGB Pro 16GB DDR4 3200 CL16

This kit delivers 16 GB of DDR4 memory across two 8 GB modules rated at 3200 MT/s with CL16 timing. Anodized aluminum heat spreaders cover custom performance PCBs built with tightly screened ICs for signal integrity. Ten ultra-bright RGB LEDs per module provide dynamic multi-zone lighting controlled through Corsair iCUE software. The kit runs at 1.35 V and supports Intel XMP 2.0 for one-click configuration.

AMD Ryzen and Intel platform builds needing RGB

Builders using AMD 300, 400 or X570 series chipsets or Intel 300 and 400 series platforms can enable the rated speed through XMP 2.0. Systems requiring ECC, registered DIMMs or speeds beyond 3200 MT/s should consider other memory lines. The 288-pin form factor fits standard desktop slots, while iCUE synchronization works with compatible Corsair coolers, keyboards and fans. Users without RGB software needs may prefer non-lit alternatives.

Sustained load stability with screened ICs

Custom performance PCBs and carefully screened ICs maintain tight 16-18-18-36 timings during extended workloads rather than only in brief benchmarks. Anodized aluminum spreaders dissipate heat from continuous data throughput at 1.35 V. XMP 2.0 applies the validated voltage and frequency profile automatically, avoiding manual tuning drift. iCUE monitoring lets users observe module temperatures while the system runs demanding tasks.

商品特色

  • Dynamic multi-zone RGB with 10 ultra-bright LEDs per module
  • iCUE software synchronizes lighting across Corsair RGB components
  • Custom performance PCB delivers high signal quality for stability
  • Tightly screened ICs provide extended overclocking potential
  • XMP 2.0 enables optimal performance with a single BIOS setting

商品規格

BrandCORSAIR
SeriesVengeance RGB Pro
ModelCMW16GX4M2Z3200C16
Capacity16GB (2 x 8GB)
Type288-Pin PC RAM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL16
Timing16-18-18-36
Voltage1.35V
BIOS/Performance ProfileIntel XMP 2.0
ColorBlack
Heat SpreaderAnodized Aluminum
FeaturesDynamic Multi-Zone RGB Lighting
10 Ultra-bright RGB LEDs per module.
Next Generation Software
Take control in CORSAIR iCUE software and synchronize lighting with other CORSAIR RGB products, including CPU coolers, keyboards and fans.
Custom Performance PCB
Provides the highest signal quality for the greatest level of performance and stability.
Tightly Screened Memory
Carefully screened ICs for extended overclocking potential.
Maximum Bandwidth and Tight Response Times
Optimized for peak performance on the latest Intel and AMD DDR4 motherboards.
No Wires Required
Requires no extra wire
Recommend UseAMD 300 Series / AMD 400 Series / AMD X570 / Intel 300 Series / Intel 400 Series
LED ColorRGB
出貨重量0.15 kg
包裝尺寸165 × 130 × 13 mm

商品問答

Does this kit require a motherboard with a DDR4 288-pin slot and XMP 2.0 support to run at 3200?

Yes, each module uses the 288-pin DDR4 form factor and the rated 3200 speed is activated through an Intel XMP 2.0 profile in the BIOS.

Will the 1.35 V CL16 timing of these modules match older DDR4 sticks I might keep?

The kit runs at 1.35 V with 16-18-18-36 timings; mixing with modules that use different voltages or timings may force the system to run at the lowest common settings.

How do I confirm the RGB lighting and 3200 speed are active after installation?

Enable the XMP 2.0 profile in BIOS to verify 3200 operation, then open CORSAIR iCUE software to see the 10 RGB LEDs per module respond to lighting controls.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。