coxbyte
coxbyte TG-30 thermal paste 17.5W/mK 2.0g
High-conductivity 17.5 W/mK paste for CPU, GPU and server cooling, 2.0 g syringe, non-corrosive, stable from -50 °C to 250 °C
- Volume / Net Weight2.0g
- Thermal Conductivity17.5 W/mK
- Long Term Operating Temperature-50 to 250 C
- SpecificationsTG-30 adopts an improved nanocarbon tube composite formula w
Weight 2 g
- 4g
- 2 g
- Reduces core temperatures by over 20 °C with 17.5 W/mK conductivity
- Non-conductive formula eliminates short-circuit risk on CPU and GPU
- Smooth silicone texture allows easy, even spreading in seconds
- Stable from -50 °C to 250 °C without drying or volatilisation
- Less than 3 % performance loss after five years of continuous use
High-conductivity thermal paste for CPUs and GPUs
Coxbyte TG-30 is a 2.0g syringe of non-conductive thermal compound rated at 17.5W/mK. It is designed for desktop processors, graphics cards and laptop coolers where efficient heat transfer matters. The smooth silicone texture spreads easily without tools. Overclockers and builders seeking reliable thermal interface material will find it suitable.
Sustained thermal transfer across a wide
The compound operates from -50°C to 250°C without volatilisation. Antioxidant additives limit performance loss to under 3% over five years. An oil-lock formula prevents separation during long periods of continuous load. The paste remains stable through repeated heating and cooling cycles typical of gaming or server workloads.
Check mounting pressure
Ensure the CPU or GPU heatspreader is clean and free of old compound residue. The supplier recommends a layer thickness comparable to a sheet of A4 paper. Verify that your cooler provides even contact across the die area. No electrical conductivity means no short-circuit risk if excess squeezes onto nearby components.
Puncte forte
- Reduces core temperatures by over 20 °C with 17.5 W/mK conductivity
- Non-conductive formula eliminates short-circuit risk on CPU and GPU
- Smooth silicone texture allows easy, even spreading in seconds
- Stable from -50 °C to 250 °C without drying or volatilisation
- Less than 3 % performance loss after five years of continuous use
Specificații
| Brand | coxbyte |
|---|---|
| Series | TG |
| Model | 30 |
| Volume / Net Weight | 2.0g |
| Thermal Conductivity | 17.5 W/mK |
| Long Term Operating Temperature | -50 to 250 C |
| Specifications | TG-30 adopts an improved nanocarbon tube composite formula with a thermal conductivity of 17.5W/mK (measured value), which can quickly reduce the temperature difference between CPU/GPU cores and meet the cooling needs of mainstream gaming consoles, high-performance graphics cards, and workstations. Its non-conductive properties completely avoid the risk of short circuit, with good viscosity optimization. Single point or nine point coating can be extended to a uniform thermal conductive layer with a thickness of 0.15mm, improving operational convenience by 15%. After curing, the tempe |
Alte versiuni ale acestui model
3 în plus din aceeași gamă
Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.
Întrebări despre acest articol
Will the 17.5 W/mK paste keep temperatures stable when the system runs all day?
The compound is rated for continuous operation from -50 °C to 250 °C and resists volatilisation, so it maintains its thermal path during extended high-load sessions.
Do I need any extra tools to apply the 2.0 g syringe?
A scraper or similar spreading tool is recommended to achieve the thin, even layer described in the application steps.
Is the non-conductive formula safe on older CPUs with exposed components nearby?
Yes, the electrically insulating silicone grease eliminates short-circuit risk even if it contacts adjacent pins or circuitry on legacy processors.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001049BTC
În stoc