Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Small white syringe of grey thermal paste, 2.0g

coxbyte

coxbyte TG-30 thermal paste 17.5W/mK 2.0g

SKU CH-Q34Y-BPQNE

High-conductivity 17.5 W/mK paste for CPU, GPU and server cooling, 2.0 g syringe, non-corrosive, stable from -50 °C to 250 °C

  • Volume / Net Weight2.0g
  • Thermal Conductivity17.5 W/mK
  • Long Term Operating Temperature-50 to 250 C
  • SpecificationsTG-30 adopts an improved nanocarbon tube composite formula w

Weight 2 g

  • Reduces core temperatures by over 20 °C with 17.5 W/mK conductivity
  • Non-conductive formula eliminates short-circuit risk on CPU and GPU
  • Smooth silicone texture allows easy, even spreading in seconds
  • Stable from -50 °C to 250 °C without drying or volatilisation
  • Less than 3 % performance loss after five years of continuous use

High-conductivity thermal paste for CPUs and GPUs

Coxbyte TG-30 is a 2.0g syringe of non-conductive thermal compound rated at 17.5W/mK. It is designed for desktop processors, graphics cards and laptop coolers where efficient heat transfer matters. The smooth silicone texture spreads easily without tools. Overclockers and builders seeking reliable thermal interface material will find it suitable.

Sustained thermal transfer across a wide

The compound operates from -50°C to 250°C without volatilisation. Antioxidant additives limit performance loss to under 3% over five years. An oil-lock formula prevents separation during long periods of continuous load. The paste remains stable through repeated heating and cooling cycles typical of gaming or server workloads.

Check mounting pressure

Ensure the CPU or GPU heatspreader is clean and free of old compound residue. The supplier recommends a layer thickness comparable to a sheet of A4 paper. Verify that your cooler provides even contact across the die area. No electrical conductivity means no short-circuit risk if excess squeezes onto nearby components.

Pontos fortes

  • Reduces core temperatures by over 20 °C with 17.5 W/mK conductivity
  • Non-conductive formula eliminates short-circuit risk on CPU and GPU
  • Smooth silicone texture allows easy, even spreading in seconds
  • Stable from -50 °C to 250 °C without drying or volatilisation
  • Less than 3 % performance loss after five years of continuous use

Especificações

Brandcoxbyte
SeriesTG
Model30
Volume / Net Weight2.0g
Thermal Conductivity17.5 W/mK
Long Term Operating Temperature-50 to 250 C
SpecificationsTG-30 adopts an improved nanocarbon tube composite formula with a thermal conductivity of 17.5W/mK (measured value), which can quickly reduce the temperature difference between CPU/GPU cores and meet the cooling needs of mainstream gaming consoles, high-performance graphics cards, and workstations. Its non-conductive properties completely avoid the risk of short circuit, with good viscosity optimization. Single point or nine point coating can be extended to a uniform thermal conductive layer with a thickness of 0.15mm, improving operational convenience by 15%. After curing, the tempe

Outras versões deste modelo

Mais 3 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Will the 17.5 W/mK paste keep temperatures stable when the system runs all day?

The compound is rated for continuous operation from -50 °C to 250 °C and resists volatilisation, so it maintains its thermal path during extended high-load sessions.

Do I need any extra tools to apply the 2.0 g syringe?

A scraper or similar spreading tool is recommended to achieve the thin, even layer described in the application steps.

Is the non-conductive formula safe on older CPUs with exposed components nearby?

Yes, the electrically insulating silicone grease eliminates short-circuit risk even if it contacts adjacent pins or circuitry on legacy processors.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.