DELL
DELL 0RWR8F 2.4TB 2.5" SAS 10K 12Gb/s internal hard drive
A 2.4TB SAS hard drive with 10000 RPM speed and 12Gb/s transfer rate for hot-swap server bays
- PackagingBare Drive
- InterfaceSAS 12Gb/s
- Capacity2.4TB
- RPM10000 RPM
- Average Latency12Gb/s
- Form Factor2.5"
- 4 TB capacity stores large datasets
- 10 000 RPM spindle delivers fast data access
- SAS 12 Gb/s interface enables high-throughput transfers
- 5 inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
Dell 0RWR8F 2.4TB SAS 10K drive
This Dell 0RWR8F is a 2.4TB 2.5 inch internal hard drive with a SAS 12Gb/s interface. It spins at 10000 RPM and is supplied as a bare drive with a hot-swap tray. The unit is new and carries Dell original part number 0RWR8F.
Suited for 12Gb/s SAS hot-swap bays
This drive suits administrators upgrading or populating compatible servers and storage arrays that accept 2.5 inch SAS drives with hot-swap trays. It is not for systems limited to 6Gb/s SAS backplanes or enclosures that require 3.5 inch form factors. Buyers needing larger capacity or a different interface should look elsewhere.
SAS 12Gb/s interface decides fit
The single specification that decides compatibility is the SAS 12Gb/s interface combined with the 2.5 inch hot-swap form factor. The host backplane and controller must support 12Gb/s SAS signalling and accept the Dell tray design for the drive to function correctly.
Puncte forte
- 4 TB capacity stores large datasets
- 10 000 RPM spindle delivers fast data access
- SAS 12 Gb/s interface enables high-throughput transfers
- 5 inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
Specificații
| Brand | Dell |
|---|---|
| Model | 0RWR8F |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 2.4TB |
| RPM | 10000 RPM |
| Average Latency | 12Gb/s |
| Form Factor | 2.5" |
Întrebări despre acest articol
Does my server need a SAS controller to use this 0RWR8F drive?
Yes, the 0RWR8F connects through a SAS 12Gb/s interface and requires a compatible SAS controller or backplane to operate.
Will this 2.5-inch 10K RPM drive fit in the same hot-swap bays as my older 3.5-inch SAS drives?
No, the 0RWR8F uses a 2.5-inch form factor and will not fit 3.5-inch bays without an adapter; it is designed for 2.5-inch hot-swap trays.
How can I verify the 0RWR8F is running at its rated 12Gb/s transfer speed after installation?
Check the negotiated link speed in your RAID controller BIOS or OS utility; it should report 12Gb/s for this drive.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
