We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL 0RWR8F 2.4TB 2.5" SAS 10K 12Gb/s internal hard drive

SKU CH-3AAE-PCER2

A 2.4TB SAS hard drive with 10000 RPM speed and 12Gb/s transfer rate for hot-swap server bays

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity2.4TB
  • RPM10000 RPM
  • Average Latency12Gb/s
  • Form Factor2.5"
  • 4 TB capacity stores large datasets
  • 10 000 RPM spindle delivers fast data access
  • SAS 12 Gb/s interface enables high-throughput transfers
  • 5 inch form factor fits dense server bays
  • Hot-swap tray allows drive replacement without downtime

Dell 0RWR8F 2.4TB SAS 10K drive

This Dell 0RWR8F is a 2.4TB 2.5 inch internal hard drive with a SAS 12Gb/s interface. It spins at 10000 RPM and is supplied as a bare drive with a hot-swap tray. The unit is new and carries Dell original part number 0RWR8F.

Suited for 12Gb/s SAS hot-swap bays

This drive suits administrators upgrading or populating compatible servers and storage arrays that accept 2.5 inch SAS drives with hot-swap trays. It is not for systems limited to 6Gb/s SAS backplanes or enclosures that require 3.5 inch form factors. Buyers needing larger capacity or a different interface should look elsewhere.

SAS 12Gb/s interface decides fit

The single specification that decides compatibility is the SAS 12Gb/s interface combined with the 2.5 inch hot-swap form factor. The host backplane and controller must support 12Gb/s SAS signalling and accept the Dell tray design for the drive to function correctly.

Highlights

  • 4 TB capacity stores large datasets
  • 10 000 RPM spindle delivers fast data access
  • SAS 12 Gb/s interface enables high-throughput transfers
  • 5 inch form factor fits dense server bays
  • Hot-swap tray allows drive replacement without downtime

Specifications

BrandDell
Model0RWR8F
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity2.4TB
RPM10000 RPM
Average Latency12Gb/s
Form Factor2.5"

Questions about this item

Does my server need a SAS controller to use this 0RWR8F drive?

Yes, the 0RWR8F connects through a SAS 12Gb/s interface and requires a compatible SAS controller or backplane to operate.

Will this 2.5-inch 10K RPM drive fit in the same hot-swap bays as my older 3.5-inch SAS drives?

No, the 0RWR8F uses a 2.5-inch form factor and will not fit 3.5-inch bays without an adapter; it is designed for 2.5-inch hot-swap trays.

How can I verify the 0RWR8F is running at its rated 12Gb/s transfer speed after installation?

Check the negotiated link speed in your RAID controller BIOS or OS utility; it should report 12Gb/s for this drive.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.