Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver 2.5 inch SAS hard drive with hot-swap tray

DELL

DELL 400-AKMR 1.2TB 2.5" SAS 10K 12Gb/s internal hard drive

SKU CH-N308-3H5CQ

A 1.2 TB 2.5-inch SAS drive spinning at 10000 RPM with a 12 Gb/s transfer rate, hot-swap tray and Dell part number 400-AKMR

  • PackagingBare Drive
  • InterfaceSAS 3Gb/s
  • Capacity1.2TB
  • RPM10000 RPM
  • Average Latency3Gb/s
  • Form Factor2.5"
  • High-capacity 1.2TB storage for demanding workloads
  • 10000 RPM spindle delivers fast data access
  • SAS interface supports 12Gb/s transfer rates
  • 5-inch form factor fits dense server bays
  • Hot-swap tray enables drive changes without downtime

Dell 400-AKMR 1.2TB 10K SAS Drive

The Dell 400-AKMR is a 1.2TB 2.5 inch SAS hard drive spinning at 10000 RPM with a 12Gb/s transfer rate. It is built for servers and storage arrays that require high-speed enterprise storage in a hot-swap form factor. The drive ships as a bare unit with Dell part number 400-AKMR.

Suits SAS bays needing 10K performance

This drive fits 2.5 inch SAS hot-swap bays in Dell PowerEdge servers and compatible enclosures that support 12Gb/s SAS signalling. It is not suitable for systems that only accept 3.5 inch drives or for workloads that demand solid-state latency. Buyers needing larger capacities should consider higher-capacity SAS models.

12Gb/s SAS interface decides compatibility

The single specification that determines fit is the 12Gb/s SAS interface; the host backplane and controller must support this speed and the SAS protocol to recognise the drive. Verify the server or enclosure documentation for 2.5 inch hot-swap SAS 12Gb/s support before purchase.

Puncte forte

  • High-capacity 1.2TB storage for demanding workloads
  • 10000 RPM spindle delivers fast data access
  • SAS interface supports 12Gb/s transfer rates
  • 5-inch form factor fits dense server bays
  • Hot-swap tray enables drive changes without downtime

Specificații

BrandDell
Model400-AKMR
PackagingBare Drive
InterfaceSAS 3Gb/s
Capacity1.2TB
RPM10000 RPM
Average Latency3Gb/s
Form Factor2.5"

Întrebări despre acest articol

What is the sustained transfer limit of the 12Gb/s SAS interface on this 1.2TB drive?

The SAS interface supports a 12Gb/s transfer rate, which sets the maximum sustained throughput for the 1.2TB capacity.

How much noise and heat does the 10000 RPM mechanism generate during continuous operation?

The 10000 RPM spindle produces typical enterprise-level acoustics and heat output for a 2.5" SAS drive under constant load.

Which controller or backplane is required to use the hot-swap SAS tray?

A SAS controller or backplane with 12Gb/s SAS support and a 2.5" hot-swap bay is needed to install the 400-AKMR drive.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.