저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Silver 2.5 inch SAS hard drive with hot-swap tray

DELL

DELL 400-AKMR 1.2TB 2.5" SAS 10K 12Gb/s internal hard drive

SKU CH-N308-3H5CQ

A 1.2 TB 2.5-inch SAS drive spinning at 10000 RPM with a 12 Gb/s transfer rate, hot-swap tray and Dell part number 400-AKMR

  • PackagingBare Drive
  • InterfaceSAS 3Gb/s
  • Capacity1.2TB
  • RPM10000 RPM
  • Average Latency3Gb/s
  • Form Factor2.5"
  • High-capacity 1.2TB storage for demanding workloads
  • 10000 RPM spindle delivers fast data access
  • SAS interface supports 12Gb/s transfer rates
  • 5-inch form factor fits dense server bays
  • Hot-swap tray enables drive changes without downtime

Dell 400-AKMR 1.2TB 10K SAS Drive

The Dell 400-AKMR is a 1.2TB 2.5 inch SAS hard drive spinning at 10000 RPM with a 12Gb/s transfer rate. It is built for servers and storage arrays that require high-speed enterprise storage in a hot-swap form factor. The drive ships as a bare unit with Dell part number 400-AKMR.

Suits SAS bays needing 10K performance

This drive fits 2.5 inch SAS hot-swap bays in Dell PowerEdge servers and compatible enclosures that support 12Gb/s SAS signalling. It is not suitable for systems that only accept 3.5 inch drives or for workloads that demand solid-state latency. Buyers needing larger capacities should consider higher-capacity SAS models.

12Gb/s SAS interface decides compatibility

The single specification that determines fit is the 12Gb/s SAS interface; the host backplane and controller must support this speed and the SAS protocol to recognise the drive. Verify the server or enclosure documentation for 2.5 inch hot-swap SAS 12Gb/s support before purchase.

주요 특징

  • High-capacity 1.2TB storage for demanding workloads
  • 10000 RPM spindle delivers fast data access
  • SAS interface supports 12Gb/s transfer rates
  • 5-inch form factor fits dense server bays
  • Hot-swap tray enables drive changes without downtime

사양

BrandDell
Model400-AKMR
PackagingBare Drive
InterfaceSAS 3Gb/s
Capacity1.2TB
RPM10000 RPM
Average Latency3Gb/s
Form Factor2.5"

이 상품에 대한 질문

What is the sustained transfer limit of the 12Gb/s SAS interface on this 1.2TB drive?

The SAS interface supports a 12Gb/s transfer rate, which sets the maximum sustained throughput for the 1.2TB capacity.

How much noise and heat does the 10000 RPM mechanism generate during continuous operation?

The 10000 RPM spindle produces typical enterprise-level acoustics and heat output for a 2.5" SAS drive under constant load.

Which controller or backplane is required to use the hot-swap SAS tray?

A SAS controller or backplane with 12Gb/s SAS support and a 2.5" hot-swap bay is needed to install the 400-AKMR drive.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.