Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver 3.5 inch internal hard drive bare drive with SAS connector

DELL

DELL 400-ANWO 10TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive

SKU CH-F7HR-Q69ZC

A 10 TB 3.5-inch SAS 12 Gb/s drive spinning at 7200 RPM for high-capacity internal storage

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity10TB
  • RPM7200 RPM
  • Average Latency12Gb/s
  • Form Factor3.5"
  • 10 TB capacity stores large data sets
  • SAS 12 Gb/s interface delivers high transfer speeds
  • 7200 RPM spindle speed provides fast disk access
  • 5 inch form factor fits standard internal bays
  • 4Kn sector format requires Windows 2012 or UEFI boot

Capacity and interface

The Dell 400-ANWO is a 10TB 3.5-inch internal hard drive built for desktop systems that accept a SAS 12Gb/s connection. It spins at 7200 RPM to provide fast disk access for large data sets.

4Kn formatting and OS constraints

The drive uses 4Kn sector technology, which changes the compatibility landscape for operating systems and hypervisors. VMware does not support this format, while Windows Server 2012 and later plus UEFI boot are required for Windows, and only some Linux distributions are supported.

Interface speed

The SAS 12Gb/s interface is the single specification that determines whether this drive can connect to your controller or backplane. Verify that your system supports 12Gb/s SAS before purchase.

Puncte forte

  • 10 TB capacity stores large data sets
  • SAS 12 Gb/s interface delivers high transfer speeds
  • 7200 RPM spindle speed provides fast disk access
  • 5 inch form factor fits standard internal bays
  • 4Kn sector format requires Windows 2012 or UEFI boot

Specificații

BrandDell
Model400-ANWO
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity10TB
RPM7200 RPM
Average Latency12Gb/s
Form Factor3.5"

Întrebări despre acest articol

What maintenance or replacement will the 10TB 7200 RPM SAS drive need later?

As a mechanical drive with moving parts, the bearings or motor may wear after years of continuous operation, requiring full drive replacement when SMART errors appear.

What limit shows up first under sustained use on the 12Gb/s SAS interface?

The 7200 RPM spindle speed caps sequential throughput, so sustained transfers will hit the mechanical ceiling before the 12Gb/s bus saturates.

How much noise, heat or power does the 3.5" 10TB drive produce running all day?

Expect typical 3.5" nearline acoustics with audible seek noise, moderate heat requiring airflow in the bay, and power draw consistent with 7200 RPM capacity drives.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.