暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch internal hard drive bare drive with SAS connector

DELL

DELL 400-ANWO 10TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive

SKU CH-F7HR-Q69ZC

A 10 TB 3.5-inch SAS 12 Gb/s drive spinning at 7200 RPM for high-capacity internal storage

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity10TB
  • RPM7200 RPM
  • Average Latency12Gb/s
  • Form Factor3.5"
  • 10 TB capacity stores large data sets
  • SAS 12 Gb/s interface delivers high transfer speeds
  • 7200 RPM spindle speed provides fast disk access
  • 5 inch form factor fits standard internal bays
  • 4Kn sector format requires Windows 2012 or UEFI boot

Capacity and interface

The Dell 400-ANWO is a 10TB 3.5-inch internal hard drive built for desktop systems that accept a SAS 12Gb/s connection. It spins at 7200 RPM to provide fast disk access for large data sets.

4Kn formatting and OS constraints

The drive uses 4Kn sector technology, which changes the compatibility landscape for operating systems and hypervisors. VMware does not support this format, while Windows Server 2012 and later plus UEFI boot are required for Windows, and only some Linux distributions are supported.

Interface speed

The SAS 12Gb/s interface is the single specification that determines whether this drive can connect to your controller or backplane. Verify that your system supports 12Gb/s SAS before purchase.

特長

  • 10 TB capacity stores large data sets
  • SAS 12 Gb/s interface delivers high transfer speeds
  • 7200 RPM spindle speed provides fast disk access
  • 5 inch form factor fits standard internal bays
  • 4Kn sector format requires Windows 2012 or UEFI boot

仕様

BrandDell
Model400-ANWO
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity10TB
RPM7200 RPM
Average Latency12Gb/s
Form Factor3.5"

この商品に関する質問

What maintenance or replacement will the 10TB 7200 RPM SAS drive need later?

As a mechanical drive with moving parts, the bearings or motor may wear after years of continuous operation, requiring full drive replacement when SMART errors appear.

What limit shows up first under sustained use on the 12Gb/s SAS interface?

The 7200 RPM spindle speed caps sequential throughput, so sustained transfers will hit the mechanical ceiling before the 12Gb/s bus saturates.

How much noise, heat or power does the 3.5" 10TB drive produce running all day?

Expect typical 3.5" nearline acoustics with audible seek noise, moderate heat requiring airflow in the bay, and power draw consistent with 7200 RPM capacity drives.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。