Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

DELL

DELL 400-ASMP 1.8TB 2.5" SAS 10K 12Gb/s internal hard drive

SKU CH-HXE9-DT0X3

A 1.8 TB SAS hard drive with 10 000 RPM speed, 12 Gb/s transfer rate and hot-swap tray for 2.5 inch bays

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Average Latency6Gb/s
  • Form Factor2.5"
  • High-capacity 1.8TB storage for demanding workloads
  • 10000 RPM spindle speed accelerates data access
  • SAS 12Gb/s interface delivers fast transfer rates
  • 5-inch form factor fits dense server bays
  • Hot-swap tray enables drive replacement without downtime

Dell 400-ASMP 1.8TB SAS Drive

This Dell 400-ASMP is a 1.8TB internal hard drive built for desktop and server bays that accept a 2.5" SAS connection. It spins at 10000 RPM and supports a 12Gb/s transfer rate for rapid data access. The bare drive ships without a tray and is sold new.

Who this suits and who it does not

It suits administrators expanding Dell arrays or replacing a failed unit in a hot-swap chassis that natively speaks SAS. Builders whose systems lack a SAS controller or backplane cannot install this disk. Buyers who need a larger single volume should look at higher-capacity models.

The spec that decides fit

The 12Gb/s SAS interface is the single specification that determines whether this drive works in your hardware; the host must provide a matching SAS port and backplane support.

Puncte forte

  • High-capacity 1.8TB storage for demanding workloads
  • 10000 RPM spindle speed accelerates data access
  • SAS 12Gb/s interface delivers fast transfer rates
  • 5-inch form factor fits dense server bays
  • Hot-swap tray enables drive replacement without downtime

Specificații

BrandDell
Model400-ASMP
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity1.8TB
RPM10000 RPM
Average Latency6Gb/s
Form Factor2.5"

Întrebări despre acest articol

Should I pick the 1.8TB 10000 RPM SAS drive or a lower-capacity model?

The 1.8TB capacity gives the most storage per bay; choose it when you need maximum space in a 2.5" slot, otherwise a smaller drive saves cost.

What does the 12Gb/s transfer rate deliver in a live server?

The 12Gb/s SAS link moves data up to that ceiling; real throughput depends on the controller and workload but will not exceed 12Gb/s.

Does the SAS 6Gb/s interface limit the 12Gb/s headline speed?

The drive negotiates at 12Gb/s on a 12Gb/s backplane; on a 6Gb/s backplane it falls back to 6Gb/s, so the interface caps the maximum.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.