Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

DELL

DELL SNP20D6FC/16G 16GB DDR3-1600 ECC Registered server RAM

SKU CH-F3Q3-1RSTW MPN SNP20D6FC/16G

16 GB DDR3 ECC registered server memory module running at 1600 MHz with CL11 latency at 1.35 V

  • Capacity16GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3-1600 (PC3-12800)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • 16 GB capacity for high-density server workloads
  • DDR3-1600 speed at 1600 MHz for responsive data access
  • ECC registered design detects and corrects memory errors
  • Low 1.35 V operation reduces power draw and heat
  • Single 240-pin module simplifies upgrade installation

16 GB DDR3-1600 ECC Registered Module

This 16 GB DDR3-1600 ECC registered DIMM is built for Dell workstations and servers that require error-correcting, buffered memory. It delivers 1600 MHz speed at PC3-12800 bandwidth with a low 1.35 V operating voltage. The single-module design suits upgrades where one slot is available.

240-Pin Installation and Common Issues

Align the notch on the 240-pin edge connector with the slot key and press firmly until the retention clips lock. Ensure the system supports registered ECC DDR3 at 1.35 V; unbuffered or non-ECC boards will not post with this module. Mixing registered and unbuffered DIMMs prevents boot.

Pre-Order Compatibility Checks

Verify that your server or workstation accepts 16 GB registered DDR3-1600 RDIMMs at 1.35 V and that the memory controller supports the 2Rx4 organisation. Confirm the motherboard has free 240-pin DDR3 slots and that the BIOS revision enables ECC functionality. Do not order for platforms limited to unbuffered memory.

Puncte forte

  • 16 GB capacity for high-density server workloads
  • DDR3-1600 speed at 1600 MHz for responsive data access
  • ECC registered design detects and corrects memory errors
  • Low 1.35 V operation reduces power draw and heat
  • Single 240-pin module simplifies upgrade installation

Specificații

BrandDell
Capacity16GB
Type240-Pin DDR3 SDRAM
SpeedDDR3-1600 (PC3-12800)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor Brand Chipset
Greutate la expediere0.45 kg
Dimensiunile coletului140 × 89 × 5 mm

Întrebări despre acest articol

How can I verify the 16GB DDR3-1600 module is running at 1600 MHz with CL11 latency after installation?

Enter the system BIOS or use a tool like CPU-Z to confirm the memory frequency reads 1600 MHz and the CAS latency shows 11.

What is included with the SNP20D6FC/16G and do I need any extra parts to install it?

The box contains one 16GB 240-pin DDR3 RDIMM. No additional components are required if your server has free DDR3 slots.

Should I choose the 16GB single module or look for a different capacity for my server?

This listing is a single 16GB registered ECC module. Select it when you need one 16GB stick; add multiple units to reach your desired total capacity.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.