Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green 240-pin DDR3 registered ECC memory module

DELL

DELL SNP20D6FC/16G 16GB DDR3-1600 ECC Registered server RAM

SKU CH-F3Q3-1RSTW MPN SNP20D6FC/16G

16 GB DDR3 ECC registered server memory module running at 1600 MHz with CL11 latency at 1.35 V

  • Capacity16GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3-1600 (PC3-12800)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • 16 GB capacity for high-density server workloads
  • DDR3-1600 speed at 1600 MHz for responsive data access
  • ECC registered design detects and corrects memory errors
  • Low 1.35 V operation reduces power draw and heat
  • Single 240-pin module simplifies upgrade installation

16 GB DDR3-1600 ECC Registered Module

This 16 GB DDR3-1600 ECC registered DIMM is built for Dell workstations and servers that require error-correcting, buffered memory. It delivers 1600 MHz speed at PC3-12800 bandwidth with a low 1.35 V operating voltage. The single-module design suits upgrades where one slot is available.

240-Pin Installation and Common Issues

Align the notch on the 240-pin edge connector with the slot key and press firmly until the retention clips lock. Ensure the system supports registered ECC DDR3 at 1.35 V; unbuffered or non-ECC boards will not post with this module. Mixing registered and unbuffered DIMMs prevents boot.

Pre-Order Compatibility Checks

Verify that your server or workstation accepts 16 GB registered DDR3-1600 RDIMMs at 1.35 V and that the memory controller supports the 2Rx4 organisation. Confirm the motherboard has free 240-pin DDR3 slots and that the BIOS revision enables ECC functionality. Do not order for platforms limited to unbuffered memory.

Fordele

  • 16 GB capacity for high-density server workloads
  • DDR3-1600 speed at 1600 MHz for responsive data access
  • ECC registered design detects and corrects memory errors
  • Low 1.35 V operation reduces power draw and heat
  • Single 240-pin module simplifies upgrade installation

Specifikationer

BrandDell
Capacity16GB
Type240-Pin DDR3 SDRAM
SpeedDDR3-1600 (PC3-12800)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor Brand Chipset
Forsendelsesvægt0.45 kg
Pakkestørrelse140 × 89 × 5 mm

Spørgsmål om denne vare

How can I verify the 16GB DDR3-1600 module is running at 1600 MHz with CL11 latency after installation?

Enter the system BIOS or use a tool like CPU-Z to confirm the memory frequency reads 1600 MHz and the CAS latency shows 11.

What is included with the SNP20D6FC/16G and do I need any extra parts to install it?

The box contains one 16GB 240-pin DDR3 RDIMM. No additional components are required if your server has free DDR3 slots.

Should I choose the 16GB single module or look for a different capacity for my server?

This listing is a single 16GB registered ECC module. Select it when you need one 16GB stick; add multiple units to reach your desired total capacity.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.