Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver 3.5 inch SATA hard drive with circuit board visible

DELL

DELL WD1003FBYX-18Y7BO 1TB 7.2K 6G 3.5" SATA internal hard drive

SKU CH-T39D-JPM1W MPN WD1003FBYX-18Y7BO

A 1 TB SATA desktop hard drive spinning at 7200 rpm in a 3.5 inch form factor for Dell PowerEdge R710 and R720 servers

  • 1 TB capacity for bulk storage
  • 7200 RPM spindle for responsive data access
  • SATA III interface for broad desktop compatibility
  • 5 inch form factor fits standard drive bays
  • Designed for Dell PowerEdge R710 R720 R720XD systems

Dell 1 TB SATA hard drive for servers

This 1 TB Dell hard drive uses a 3.5 inch form factor and a SATA interface with 7200 RPM rotation speed. It is built for internal desktop or server storage bays. The drive carries the WD1003FBYX-18Y7BO model number and is supplied new.

Suits admins expanding R710, R720 or R720XD arrays

This drive fits Dell PowerEdge R710, R720 and R720XD systems that accept 3.5 inch SATA drives. Builders needing a different interface, a smaller form factor, or a higher capacity should look at something else.

7200 RPM spindle speed

The 7200 RPM rotation speed determines the drive’s sustained throughput and access latency. Match this speed to the workload requirements of the target server before purchase.

Puncte forte

  • 1 TB capacity for bulk storage
  • 7200 RPM spindle for responsive data access
  • SATA III interface for broad desktop compatibility
  • 5 inch form factor fits standard drive bays
  • Designed for Dell PowerEdge R710 R720 R720XD systems

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

How much noise and heat does the 7200RPM 3.5" SATA drive produce during continuous operation?

The 7200RPM spindle speed and 3.5" form factor mean the drive will generate typical mechanical noise and heat for a desktop-class SATA drive under sustained load; ensure your chassis has adequate airflow.

What existing hardware is required to install this 1TB SATA III 3.5" drive?

You need a free 3.5" drive bay, a SATA data cable, a SATA power connector from your power supply, and a motherboard or controller with an available SATA III port.

Will this 6G SATA drive work reliably in an older system that only supports 3G SATA?

Yes, the SATA III interface is backward compatible with 3G SATA ports; the drive will operate at the slower 3G speed without any configuration changes.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.