E-POWER
E-POWER EP-FAN-2RGB6 120mm ARGB PWM Case Fan 6-Pack with Hub and Remote
Six 120 mm ARGB PWM fans with an 8-port hub and RF remote offering 13 dynamic and 7 static lighting modes
- TypeCase Fan
- CompatibilityCase
- RPM1600-1999 RPM
- Power Connector4 Pin
- Color2-Tone
- LEDRGB
- Six ARGB PWM fans provide vivid lighting and airflow
- 8-port hub expands a single PWM header to eight fans
- RF remote selects 13 dynamic and 7 static lighting modes
- 3 PWM Y splitters simplify multi-fan cable routing
- Fans run 1600-1999 RPM at 12 V for quiet cooling
Six-Fan ARGB PWM Kit
This bundle delivers six 120mm ARGB PWM fans, an 8-port 4-pin hub and an RF remote in one package. It is aimed at builders who want synchronised lighting and centralised speed control across multiple intake or exhaust positions. The hub draws power from a single motherboard PWM header while distributing the same signal to every connected fan. Each fan spins between 1600 and 1999 RPM at 12 V.
Replaces Separate Fans and Splitters
The kit eliminates the need to buy individual fans, Y-splitters and a separate controller when expanding beyond one or two chassis headers. The jump is worth it when a build requires more than three fans on a single PWM header or when unified RGB control via remote is preferred over motherboard software. Three PWM Y-splitters are included for installations that bypass the hub.
Check Motherboard Header and Clearance
Verify that the motherboard provides at least one 4-pin PWM header rated for the combined current draw of the fans you intend to connect. Ensure the case has mounting points for 120mm fans at the planned locations and that cable routing allows the hub and remote receiver to reach a secure spot. The remote uses RF signalling so line-of-sight to the receiver is not required.
Puncte forte
- Six ARGB PWM fans provide vivid lighting and airflow
- 8-port hub expands a single PWM header to eight fans
- RF remote selects 13 dynamic and 7 static lighting modes
- 3 PWM Y splitters simplify multi-fan cable routing
- Fans run 1600-1999 RPM at 12 V for quiet cooling
Specificații
| Brand | E-POWER |
|---|---|
| Series | RGB |
| Model | EP-FAN-2RGB6 |
| Type | Case Fan |
| Compatibility | Case |
| RPM | 1600-1999 RPM |
| Power Connector | 4 Pin |
| Color | 2-Tone |
| LED | RGB |
Întrebări despre acest articol
Will the 120 mm fans clear my case fan mounts?
Each fan measures 120 mm square, the standard size for most mid-tower and full-tower chassis, so they fit any 120 mm mounting point.
How do I connect the 8-port hub so all six fans follow the motherboard PWM curve?
Plug the hub's 4-pin lead into a single motherboard PWM header, then attach each fan to the hub; the hub passes the PWM signal to every port so all fans ramp together.
When will the ARGB LEDs or fan bearings need replacement?
The fans run at 1600-1999 RPM on 12 V power; typical sleeve-bearing life at that speed is several years of continuous use, and the LEDs are rated for tens of thousands of hours.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
