We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six 120 mm ARGB PWM fans, 8-port hub and remote, two-tone finish

E-POWER

E-POWER EP-FAN-2RGB6 120mm ARGB PWM Case Fan 6-Pack with Hub and Remote

SKU CH-TNP4-G4DAM

Six 120 mm ARGB PWM fans with an 8-port hub and RF remote offering 13 dynamic and 7 static lighting modes

  • TypeCase Fan
  • CompatibilityCase
  • RPM1600-1999 RPM
  • Power Connector4 Pin
  • Color2-Tone
  • LEDRGB
  • Six ARGB PWM fans provide vivid lighting and airflow
  • 8-port hub expands a single PWM header to eight fans
  • RF remote selects 13 dynamic and 7 static lighting modes
  • 3 PWM Y splitters simplify multi-fan cable routing
  • Fans run 1600-1999 RPM at 12 V for quiet cooling

Six-Fan ARGB PWM Kit

This bundle delivers six 120mm ARGB PWM fans, an 8-port 4-pin hub and an RF remote in one package. It is aimed at builders who want synchronised lighting and centralised speed control across multiple intake or exhaust positions. The hub draws power from a single motherboard PWM header while distributing the same signal to every connected fan. Each fan spins between 1600 and 1999 RPM at 12 V.

Replaces Separate Fans and Splitters

The kit eliminates the need to buy individual fans, Y-splitters and a separate controller when expanding beyond one or two chassis headers. The jump is worth it when a build requires more than three fans on a single PWM header or when unified RGB control via remote is preferred over motherboard software. Three PWM Y-splitters are included for installations that bypass the hub.

Check Motherboard Header and Clearance

Verify that the motherboard provides at least one 4-pin PWM header rated for the combined current draw of the fans you intend to connect. Ensure the case has mounting points for 120mm fans at the planned locations and that cable routing allows the hub and remote receiver to reach a secure spot. The remote uses RF signalling so line-of-sight to the receiver is not required.

Highlights

  • Six ARGB PWM fans provide vivid lighting and airflow
  • 8-port hub expands a single PWM header to eight fans
  • RF remote selects 13 dynamic and 7 static lighting modes
  • 3 PWM Y splitters simplify multi-fan cable routing
  • Fans run 1600-1999 RPM at 12 V for quiet cooling

Specifications

BrandE-POWER
SeriesRGB
ModelEP-FAN-2RGB6
TypeCase Fan
CompatibilityCase
RPM1600-1999 RPM
Power Connector4 Pin
Color2-Tone
LEDRGB

Questions about this item

Will the 120 mm fans clear my case fan mounts?

Each fan measures 120 mm square, the standard size for most mid-tower and full-tower chassis, so they fit any 120 mm mounting point.

How do I connect the 8-port hub so all six fans follow the motherboard PWM curve?

Plug the hub's 4-pin lead into a single motherboard PWM header, then attach each fan to the hub; the hub passes the PWM signal to every port so all fans ramp together.

When will the ARGB LEDs or fan bearings need replacement?

The fans run at 1600-1999 RPM on 12 V power; typical sleeve-bearing life at that speed is several years of continuous use, and the LEDs are rated for tens of thousands of hours.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.