EN-Labs
EN-Labs PCE4USB-RS4 4-port USB 3.0 expansion card
Adds four USB 3.0 Type-A ports through a PCI Express x1 slot using a NEC UPD720201 chipset for 5 Gbit/s speeds, includes a SATA power connector and low-profile bracket
- TypePCI Express to USB Card
- External USB Ports4-port USB 3.0
- SpecificationsBus Type:PCI Express Type Standard:Profile (LP bracket incl.
- FeaturesAdd 4 USB 3.0 ports through a PCI Express slot Compatible wi
- Add four USB 3.0 ports via one PCI Express x1 slot
- NEC UPD720201 chipset delivers 5 Gbit/s Super Speed transfers
- Works in PCIe 1x, 4x, 8x or 16x slots
- SATA 15-pin power connector for stable operation
- Low-profile bracket included for small-form-factor builds
Four USB 3.0 ports via PCI Express
The EN-Labs PCE4USB-RS4 adds four USB Type-A 3.0 ports to a desktop through a single PCI Express x1 slot. It uses the NEC UPD720201 controller and is aimed at users who need more high-speed peripheral connections than the motherboard provides. The card fits full-profile brackets and works in x1, x4, x8 or x16 slots.
Fits a free PCIe slot and draws auxiliary power
Installation requires an available PCI Express slot of any width and a Molex 4-pin power connector from the power supply. The card draws supplementary power through that connector so the four ports can deliver full current without loading the slot alone. It frees up existing rear-panel ports for other devices.
Sustained 5 Gbit/s transfers
Under continuous load the controller maintains up to 5 Gbit/s per port and remains compliant with the USB 3.0 Super Speed specification. The chipset also supports USB 2.0, 1.1 and 1.0 devices at their native rates. Hot-plug operation is supported across all four ports.
Puncte forte
- Add four USB 3.0 ports via one PCI Express x1 slot
- NEC UPD720201 chipset delivers 5 Gbit/s Super Speed transfers
- Works in PCIe 1x, 4x, 8x or 16x slots
- SATA 15-pin power connector for stable operation
- Low-profile bracket included for small-form-factor builds
Specificații
| Brand | En-Labs |
|---|---|
| Model | PCE4USB-RS4 |
| Type | PCI Express to USB Card |
| External USB Ports | 4-port USB 3.0 |
| Specifications | Bus Type:PCI Express Type Standard:Profile (LP bracket incl.) Chipset:NEC UPD720201 Interface: USB 3.0 Port Type and Rate :USB 3.0 - 5 Gbit/s Connector Type(s): 1 - PCI Express x1 Male External Ports: 4 - USB Type-A (9 pin) USB 3.0 Female Internal Ports : 1 - SATA 15pin interface |
| Features | Add 4 USB 3.0 ports through a PCI Express slot Compatible with PCI-Express 2.0 stardard Compatible with Super Speed USB 3.0 5Gbps stardard,backwards to USB 2.0 and USB 1.1 Compatible with XHCI specification 1.0 Chip set : NEC UPD720201 Maximum transfer speed : 5Gbps Power by PCIe slot,no extra power is needed, but still built-in power-enhanced SATA 15 pin male Interface Supports PCIe 1x, 4x, 8x, 16x Slot Support Windows XP / 2003 / Win7 / Win8 / Vista / Linux |
Întrebări despre acest articol
How many devices can run at full 5 Gbit/s before the PCIe 2.0 x1 link saturates?
The PCIe 2.0 x1 link provides 5 Gbit/s total bandwidth, so only one USB 3.0 port can sustain full speed; additional active ports share that throughput.
Does the NEC UPD720201 chipset need active cooling when all four ports transfer data continuously?
The card draws power from the PCIe slot and the onboard Molex 4-pin connector; no fan or heatsink is fitted, so sustained loads rely on case airflow alone.
Which power connector must the power supply provide for the extra Molex 4-pin input?
A standard Molex 4-pin peripheral connector from the PSU plugs into the card’s onboard male header to supplement slot power.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.



