Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Aqua blue duplex fibre patch cable with LC and SC connectors, 50m length

Enfain

Enfain OM3 LC-SC Duplex Multimode Fibre Optic Cable 50m Aqua Blue

SKU CH-4Z27-V4NE2

A 50-metre OM3 duplex patch cable with LC-SC connectors rated for 10 Gb/s at 850 nm, 3.0 mm jacket, typical insertion loss of .2 dB and return loss above 38 dB

Length 50m

  • Supports 10 Gb, 40 G and 1 G links with OM3 core
  • Low 0.2 dB typical insertion loss keeps signal strong
  • High return loss above 38 dB reduces reflection
  • Ceramic ferrules rated for 1000 mating cycles
  • 0 mm PVC jacket bends to 330 mm radius

OM3 duplex fibre cable for 10 Gb links

This 50-metre OM3 multimode cable uses a duplex LC-SC connector pair to join switches, servers or data-centre patch panels. The aqua-blue 3.0 mm PVC jacket protects a 10-gigabit core rated for 850 nm transmission. Typical insertion loss is .2 dB with a maximum of .3 dB, and return loss exceeds 38 dB. It is built for 1 Gb, 10 Gb and 40 Gb Ethernet environments.

Verify connector types

Confirm that both ends of your link accept LC and SC ferrules respectively, as this cable cannot mate with ST, FC or MPO interfaces. The minimum bend radius is 330 mm, so plan routing that avoids tighter curves inside cabinets or cable trays. Operating temperature spans -20 °C to +60 °C, so ensure the installation area stays within that range. The jacket is not rated for outdoor or plenum use.

Fits standard patch-panel density

Ceramic ferrules rated for 1000 mating cycles allow repeated re-patching without signal degradation. The duplex construction carries transmit and receive fibres in one sheath, halving the cable count compared with simplex runs. Low loss budgets leave headroom for additional connectors or splices in the same channel. The 50-metre length suits cross-rack or row-to-row links in typical data-centre aisles.

Puncte forte

  • Supports 10 Gb, 40 G and 1 G links with OM3 core
  • Low 0.2 dB typical insertion loss keeps signal strong
  • High return loss above 38 dB reduces reflection
  • Ceramic ferrules rated for 1000 mating cycles
  • 0 mm PVC jacket bends to 330 mm radius

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What connectors and jacket come with the 50 m cable, and is anything else needed?

The cable has LC and SC duplex connectors on a 3.0 mm PVC jacket. It is a complete patch cord; no extra parts are required for a standard link.

When should I pick this OM3 duplex cable instead of another grade?

Choose this OM3 cable when your transceivers operate at 850 nm and your link budget is built for 10 G multimode performance.

What does the 0.2 dB typical insertion loss mean once the cable is installed?

A typical loss of 0.2 dB per connection keeps signal degradation low, supporting reliable 1 G, 10 G and 40 G throughput across the 50 m run.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.