Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się

Enfain

Enfain OM3 LC-SC Duplex Multimode Fibre Optic Cable 50m Aqua Blue

SKU CH-4Z27-V4NE2

A 50-metre OM3 duplex patch cable with LC-SC connectors rated for 10 Gb/s at 850 nm, 3.0 mm jacket, typical insertion loss of .2 dB and return loss above 38 dB

Length 50m

  • Supports 10 Gb, 40 G and 1 G links with OM3 core
  • Low 0.2 dB typical insertion loss keeps signal strong
  • High return loss above 38 dB reduces reflection
  • Ceramic ferrules rated for 1000 mating cycles
  • 0 mm PVC jacket bends to 330 mm radius

OM3 duplex fibre cable for 10 Gb links

This 50-metre OM3 multimode cable uses a duplex LC-SC connector pair to join switches, servers or data-centre patch panels. The aqua-blue 3.0 mm PVC jacket protects a 10-gigabit core rated for 850 nm transmission. Typical insertion loss is .2 dB with a maximum of .3 dB, and return loss exceeds 38 dB. It is built for 1 Gb, 10 Gb and 40 Gb Ethernet environments.

Verify connector types

Confirm that both ends of your link accept LC and SC ferrules respectively, as this cable cannot mate with ST, FC or MPO interfaces. The minimum bend radius is 330 mm, so plan routing that avoids tighter curves inside cabinets or cable trays. Operating temperature spans -20 °C to +60 °C, so ensure the installation area stays within that range. The jacket is not rated for outdoor or plenum use.

Fits standard patch-panel density

Ceramic ferrules rated for 1000 mating cycles allow repeated re-patching without signal degradation. The duplex construction carries transmit and receive fibres in one sheath, halving the cable count compared with simplex runs. Low loss budgets leave headroom for additional connectors or splices in the same channel. The 50-metre length suits cross-rack or row-to-row links in typical data-centre aisles.

Najważniejsze cechy

  • Supports 10 Gb, 40 G and 1 G links with OM3 core
  • Low 0.2 dB typical insertion loss keeps signal strong
  • High return loss above 38 dB reduces reflection
  • Ceramic ferrules rated for 1000 mating cycles
  • 0 mm PVC jacket bends to 330 mm radius

Specyfikacja

Na razie brak opublikowanej specyfikacji tego produktu.

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

What connectors and jacket come with the 50 m cable, and is anything else needed?

The cable has LC and SC duplex connectors on a 3.0 mm PVC jacket. It is a complete patch cord; no extra parts are required for a standard link.

When should I pick this OM3 duplex cable instead of another grade?

Choose this OM3 cable when your transceivers operate at 850 nm and your link budget is built for 10 G multimode performance.

What does the 0.2 dB typical insertion loss mean once the cable is installed?

A typical loss of 0.2 dB per connection keeps signal degradation low, supporting reliable 1 G, 10 G and 40 G throughput across the 50 m run.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.