Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Twelve white compression fittings with brass bodies and black chrome finish for G1/4 threads and 3/8 ID 1/2 OD tubing

greenDracaena

greenDracaena G1/4" to 3/8" ID 1/2" OD Compression Fitting 12 Pack White

SKU CH-HRZJ-YXBEJ

Twelve white brass compression fittings with G1/4 threads for 10×13 mm soft tubing and built-in O-ring seals

  • Radiator Size12 pcs
  • Fan Size12 pcs
  • ColorWhite
  • LED ColorSoft Tube 1/2" OD (White)
  • Package ContentsO-rings
  • Brass construction resists corrosion for long loop life
  • G1/4 threads fit standard water-block ports
  • 3/8" ID 1/2" OD matches 10×13 mm soft tubing
  • Embedded O-ring creates leakproof seal under pressure
  • 12-piece pack covers a full custom loop

Premium Brass Fittings for Soft Tubing

This pack contains twelve G1/4 compression fittings machined from high-quality brass with a black chrome finish. They are designed for builders assembling custom water-cooling loops who need reliable connections for soft tubing. The white colour theme suits monochrome or pastel builds.

Leak-Free Seal with Embedded O-Rings

Each fitting uses an embedded O-ring to create a secure, leakproof seal when tightened onto 10×13 mm PVC hose. The brass construction resists corrosion and handles normal loop pressures without weeping or noise. No additional sealant is required for a watertight joint.

Direct G1/4 Thread Compatibility

The fittings screw straight into any component with a standard G1/4 port, such as radiators, blocks, reservoirs or pumps. They accept 3/8 inch ID, 1/2 inch OD soft tubing, freeing the builder from proprietary push-fit ecosystems. A pre-power leak test is recommended to verify every joint.

Puncte forte

  • Brass construction resists corrosion for long loop life
  • G1/4 threads fit standard water-block ports
  • 3/8" ID 1/2" OD matches 10×13 mm soft tubing
  • Embedded O-ring creates leakproof seal under pressure
  • 12-piece pack covers a full custom loop

Specificații

BrandgreenDracaena
SeriesSoft Tube 1/2" OD (White)
Radiator Size12 pcs
Fan Size12 pcs
ColorWhite
LED ColorSoft Tube 1/2" OD (White)
Package ContentsO-rings

Întrebări despre acest articol

How do I install the G1/4" compression fittings onto 3/8" ID soft tubing without leaks?

Slide the compression nut and collar onto the 10×13 mm PVC hose, push the hose fully over the brass barb until it seats against the body, then hand-tighten the nut until the embedded O-ring compresses — do not use tools, which can crack the white finish and deform the seal.

Which parts will need replacement after extended use in a custom loop?

The included O-rings are the only wear items; plan to swap them during annual loop maintenance or if you disassemble the fittings, while the brass bodies and black chrome finish remain serviceable.

What is the first limitation I will hit when running the loop continuously at high flow rates?

The 3/8" inner diameter of the 10×13 mm tubing becomes the flow bottleneck before the G1/4" threads or compression joints, so size your pump and radiator area accordingly.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.