Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Twelve white compression fittings with brass bodies and black chrome finish for G1/4 threads and 3/8 ID 1/2 OD tubing

greenDracaena

greenDracaena G1/4" to 3/8" ID 1/2" OD Compression Fitting 12 Pack White

SKU CH-HRZJ-YXBEJ

Twelve white brass compression fittings with G1/4 threads for 10×13 mm soft tubing and built-in O-ring seals

  • Radiator Size12 pcs
  • Fan Size12 pcs
  • ColorWhite
  • LED ColorSoft Tube 1/2" OD (White)
  • Package ContentsO-rings
  • Brass construction resists corrosion for long loop life
  • G1/4 threads fit standard water-block ports
  • 3/8" ID 1/2" OD matches 10×13 mm soft tubing
  • Embedded O-ring creates leakproof seal under pressure
  • 12-piece pack covers a full custom loop

Premium Brass Fittings for Soft Tubing

This pack contains twelve G1/4 compression fittings machined from high-quality brass with a black chrome finish. They are designed for builders assembling custom water-cooling loops who need reliable connections for soft tubing. The white colour theme suits monochrome or pastel builds.

Leak-Free Seal with Embedded O-Rings

Each fitting uses an embedded O-ring to create a secure, leakproof seal when tightened onto 10×13 mm PVC hose. The brass construction resists corrosion and handles normal loop pressures without weeping or noise. No additional sealant is required for a watertight joint.

Direct G1/4 Thread Compatibility

The fittings screw straight into any component with a standard G1/4 port, such as radiators, blocks, reservoirs or pumps. They accept 3/8 inch ID, 1/2 inch OD soft tubing, freeing the builder from proprietary push-fit ecosystems. A pre-power leak test is recommended to verify every joint.

Pluspunten

  • Brass construction resists corrosion for long loop life
  • G1/4 threads fit standard water-block ports
  • 3/8" ID 1/2" OD matches 10×13 mm soft tubing
  • Embedded O-ring creates leakproof seal under pressure
  • 12-piece pack covers a full custom loop

Specificaties

BrandgreenDracaena
SeriesSoft Tube 1/2" OD (White)
Radiator Size12 pcs
Fan Size12 pcs
ColorWhite
LED ColorSoft Tube 1/2" OD (White)
Package ContentsO-rings

Vragen over dit artikel

How do I install the G1/4" compression fittings onto 3/8" ID soft tubing without leaks?

Slide the compression nut and collar onto the 10×13 mm PVC hose, push the hose fully over the brass barb until it seats against the body, then hand-tighten the nut until the embedded O-ring compresses — do not use tools, which can crack the white finish and deform the seal.

Which parts will need replacement after extended use in a custom loop?

The included O-rings are the only wear items; plan to swap them during annual loop maintenance or if you disassemble the fittings, while the brass bodies and black chrome finish remain serviceable.

What is the first limitation I will hit when running the loop continuously at high flow rates?

The 3/8" inner diameter of the 10×13 mm tubing becomes the flow bottleneck before the G1/4" threads or compression joints, so size your pump and radiator area accordingly.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.