Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

HPE

HPE Aruba JL087A 1050W 54V redundant server power supply

SKU CH-GSEN-DHETP

Redundant 1050 W 54 V server power supply for HPE Aruba 2930M and 3810M switches

  • TypeRedundant Power Supply
  • Single/RedundantRedundant
  • Maximum Power1050W
  • Output Current54V
  • Input VoltageAC 110-240V
  • Input Frequency Range50/60 Hz
  • Redundant design keeps switch running during power-supply failure
  • 1050W maximum power supports full PoE+ loads on 48-port models
  • 54V DC output matches Aruba 2930M and 3810M switch requirements
  • AC 110-240V input works on global mains without configuration
  • Compact 1.60" x 3.30" x 8.90" form factor fits single-slot chassis

Compatible Switch Models

This redundant power supply is built for HPE Aruba 2930M and 3810M switches with a single power-supply slot. It fits the 48G, 48G POE+ and 48G PoE+ 1-slot variants. Network engineers upgrading or maintaining these chassis can install it directly. It is not suited for switches that require a different form factor or voltage.

Redundant Operation Benefit

The redundant design lets a second unit share the load so that one failure does not cut power to the switch. Hot-swap capability means a faulty module can be replaced without downtime. This matters for environments that need continuous PoE delivery to access points, phones or cameras. Buyers without a redundant chassis gain no advantage from this unit.

54 V 1050 W Output

The supply delivers 54 V at up to 1050 W from an AC 110-240 V source at 50/60 Hz. That exact voltage and wattage combination determines whether the switch can power its full port count and PoE budget. If the target chassis specifies a different output voltage or lower maximum power, this model will not meet the requirement.

Puncte forte

  • Redundant design keeps switch running during power-supply failure
  • 1050W maximum power supports full PoE+ loads on 48-port models
  • 54V DC output matches Aruba 2930M and 3810M switch requirements
  • AC 110-240V input works on global mains without configuration
  • Compact 1.60" x 3.30" x 8.90" form factor fits single-slot chassis

Specificații

BrandHPE
ModelJL087A#ABA
Part NumberJL087A
TypeRedundant Power Supply
Single/RedundantRedundant
Maximum Power1050W
Output Current54V
Input VoltageAC 110-240V
Input Frequency Range50/60 Hz
FeaturesDesigned for HPE Aruba 2930M 48G 1-Slot, 2930M 48G POE+ 1-Slot, 3810M 48G PoE+ 1-slot Switch
Dimensions1.60" x 3.30" x 8.90"

Întrebări despre acest articol

Will the hot-swap redundant module need its internal fan replaced during the switch's service life?

The unit is a sealed hot-swap module with no user-serviceable fan; if airflow degrades the entire power supply is replaced as a single FRU.

What limits continuous 1050W output before the supply throttles or shuts down?

Thermal protection triggers when internal temperature exceeds the design limit; sustained full load is supported within the 110-240V AC input range at 50/60 Hz.

How much acoustic noise and heat does the 1050W 54V unit produce in a 2930M or 3810M chassis running 24/7?

The variable-speed fan runs quieter at low load and ramps under full 1050W draw; heat exhausted equals input power minus delivered 54V output.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.