Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Rectangular silver metal server power supply unit with ventilation grille and connector face

HPE

HPE Aruba JL087A 1050W 54V redundant server power supply

SKU CH-GSEN-DHETP

Redundant 1050 W 54 V server power supply for HPE Aruba 2930M and 3810M switches

  • TypeRedundant Power Supply
  • Single/RedundantRedundant
  • Maximum Power1050W
  • Output Current54V
  • Input VoltageAC 110-240V
  • Input Frequency Range50/60 Hz
  • Redundant design keeps switch running during power-supply failure
  • 1050W maximum power supports full PoE+ loads on 48-port models
  • 54V DC output matches Aruba 2930M and 3810M switch requirements
  • AC 110-240V input works on global mains without configuration
  • Compact 1.60" x 3.30" x 8.90" form factor fits single-slot chassis

Compatible Switch Models

This redundant power supply is built for HPE Aruba 2930M and 3810M switches with a single power-supply slot. It fits the 48G, 48G POE+ and 48G PoE+ 1-slot variants. Network engineers upgrading or maintaining these chassis can install it directly. It is not suited for switches that require a different form factor or voltage.

Redundant Operation Benefit

The redundant design lets a second unit share the load so that one failure does not cut power to the switch. Hot-swap capability means a faulty module can be replaced without downtime. This matters for environments that need continuous PoE delivery to access points, phones or cameras. Buyers without a redundant chassis gain no advantage from this unit.

54 V 1050 W Output

The supply delivers 54 V at up to 1050 W from an AC 110-240 V source at 50/60 Hz. That exact voltage and wattage combination determines whether the switch can power its full port count and PoE budget. If the target chassis specifies a different output voltage or lower maximum power, this model will not meet the requirement.

Pluspunten

  • Redundant design keeps switch running during power-supply failure
  • 1050W maximum power supports full PoE+ loads on 48-port models
  • 54V DC output matches Aruba 2930M and 3810M switch requirements
  • AC 110-240V input works on global mains without configuration
  • Compact 1.60" x 3.30" x 8.90" form factor fits single-slot chassis

Specificaties

BrandHPE
ModelJL087A#ABA
Part NumberJL087A
TypeRedundant Power Supply
Single/RedundantRedundant
Maximum Power1050W
Output Current54V
Input VoltageAC 110-240V
Input Frequency Range50/60 Hz
FeaturesDesigned for HPE Aruba 2930M 48G 1-Slot, 2930M 48G POE+ 1-Slot, 3810M 48G PoE+ 1-slot Switch
Dimensions1.60" x 3.30" x 8.90"

Vragen over dit artikel

Will the hot-swap redundant module need its internal fan replaced during the switch's service life?

The unit is a sealed hot-swap module with no user-serviceable fan; if airflow degrades the entire power supply is replaced as a single FRU.

What limits continuous 1050W output before the supply throttles or shuts down?

Thermal protection triggers when internal temperature exceeds the design limit; sustained full load is supported within the 110-240V AC input range at 50/60 Hz.

How much acoustic noise and heat does the 1050W 54V unit produce in a 2930M or 3810M chassis running 24/7?

The variable-speed fan runs quieter at low load and ramps under full 1050W draw; heat exhausted equals input power minus delivered 54V output.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.