Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Blue ATX benchtop adapter board with 24-pin socket, USB port, binding posts and fuses

JMT

JMT 2pcs ATX 20/24Pin Benchtop Power Adapter Board with USB 5V Port Blue

SKU CH-1BHR-TB5Z8

Converts an ATX supply into a four-rail benchtop unit with 3.3V, 5V, 12V and -12V outputs, each fused at 5A and brought to binding posts

  • TypeAT
  • Converts ATX supply into bench source with 3.3 V 5 V 12 V -12 V rails
  • Four fused 5 A channels each with dedicated ground binding post
  • On-board 24-pin ATX socket accepts 20-pin plugs with power LED and switch
  • Compact 128 x 48 x 30 mm PCB on plastic spacers prevents shorts
  • Two identical boards included for parallel or backup project use

Bench power adapter for ATX supplies

This pair of blue adapter boards converts a standard ATX power supply into a benchtop unit with four regulated rails. Each board exposes 3.3 V, 5 V, 12 V and -12 V outputs through binding posts that share a common ground. A 5 A replaceable fuse protects every rail and an onboard switch cuts all outputs instantly. The module measures 128 x 48 x 30 mm and sits on plastic spacers to prevent shorts.

24-pin ATX connector with 20-pin backward fit

The board accepts a full 24-pin ATX plug while remaining compatible with older 20-pin connectors. Power flows through the standard socket to the four fused outputs and a dedicated USB 5 V port. A green LED indicates when the supply is live. No soldering is required; the binding posts accept bare wire or banana plugs for quick project wiring.

Makers who need quick rail access without a bench

Hobbyists building embedded boards, repairing vintage gear or testing sensors will appreciate the instant 3.3 V, 5 V and ±12 V rails. Users requiring higher current than 5 A per rail or isolated outputs should look elsewhere. The kit includes two identical boards so a spare is always on hand.

Puncte forte

  • Converts ATX supply into bench source with 3.3 V 5 V 12 V -12 V rails
  • Four fused 5 A channels each with dedicated ground binding post
  • On-board 24-pin ATX socket accepts 20-pin plugs with power LED and switch
  • Compact 128 x 48 x 30 mm PCB on plastic spacers prevents shorts
  • Two identical boards included for parallel or backup project use

Specificații

TypeAT

Întrebări despre acest articol

What does the 5 A fuse on each rail mean when I am powering a project?

Each 3.3 V, 5 V, 12 V and -12 V output is protected by its own 5 A fuse, so a short or overload on one rail will not affect the others and the fuse can be swapped by the user.

How does the 24-pin ATX connector limit what power supplies I can use?

The board accepts a standard 24-pin ATX plug and is also compatible with 20-pin plugs, so any ATX or partial BTX supply with those connectors will work.

Will the 128 × 48 mm board fit inside a standard PC case or do I need open bench space?

The board measures 128 × 48 × 30 mm and includes plastic spacers to prevent shorts, so it is intended for open benchtop use rather than mounting inside a case.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.