저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Blue ATX benchtop adapter board with 24-pin socket, USB port, binding posts and fuses

JMT

JMT 2pcs ATX 20/24Pin Benchtop Power Adapter Board with USB 5V Port Blue

SKU CH-1BHR-TB5Z8

Converts an ATX supply into a four-rail benchtop unit with 3.3V, 5V, 12V and -12V outputs, each fused at 5A and brought to binding posts

  • TypeAT
  • Converts ATX supply into bench source with 3.3 V 5 V 12 V -12 V rails
  • Four fused 5 A channels each with dedicated ground binding post
  • On-board 24-pin ATX socket accepts 20-pin plugs with power LED and switch
  • Compact 128 x 48 x 30 mm PCB on plastic spacers prevents shorts
  • Two identical boards included for parallel or backup project use

Bench power adapter for ATX supplies

This pair of blue adapter boards converts a standard ATX power supply into a benchtop unit with four regulated rails. Each board exposes 3.3 V, 5 V, 12 V and -12 V outputs through binding posts that share a common ground. A 5 A replaceable fuse protects every rail and an onboard switch cuts all outputs instantly. The module measures 128 x 48 x 30 mm and sits on plastic spacers to prevent shorts.

24-pin ATX connector with 20-pin backward fit

The board accepts a full 24-pin ATX plug while remaining compatible with older 20-pin connectors. Power flows through the standard socket to the four fused outputs and a dedicated USB 5 V port. A green LED indicates when the supply is live. No soldering is required; the binding posts accept bare wire or banana plugs for quick project wiring.

Makers who need quick rail access without a bench

Hobbyists building embedded boards, repairing vintage gear or testing sensors will appreciate the instant 3.3 V, 5 V and ±12 V rails. Users requiring higher current than 5 A per rail or isolated outputs should look elsewhere. The kit includes two identical boards so a spare is always on hand.

주요 특징

  • Converts ATX supply into bench source with 3.3 V 5 V 12 V -12 V rails
  • Four fused 5 A channels each with dedicated ground binding post
  • On-board 24-pin ATX socket accepts 20-pin plugs with power LED and switch
  • Compact 128 x 48 x 30 mm PCB on plastic spacers prevents shorts
  • Two identical boards included for parallel or backup project use

사양

TypeAT

이 상품에 대한 질문

What does the 5 A fuse on each rail mean when I am powering a project?

Each 3.3 V, 5 V, 12 V and -12 V output is protected by its own 5 A fuse, so a short or overload on one rail will not affect the others and the fuse can be swapped by the user.

How does the 24-pin ATX connector limit what power supplies I can use?

The board accepts a standard 24-pin ATX plug and is also compatible with 20-pin plugs, so any ATX or partial BTX supply with those connectors will work.

Will the 128 × 48 mm board fit inside a standard PC case or do I need open bench space?

The board measures 128 × 48 × 30 mm and includes plastic spacers to prevent shorts, so it is intended for open benchtop use rather than mounting inside a case.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.